American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Shaper or Router Table? Tulsa OK

A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis.

Woodcraft - Tulsa
(918) 384-0100
5511 E. 41st Street
Tulsa, OK

Data Provided by:
The Home Depot
(918)632-0069
4041 S Sheridan
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)299-3028
8880 S Delaware Avenue
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Tulsa
918-295-4940
1211 South Peoria Ave Tulsa, OK, 74120
Tulsa, OK
 
SPEC Building Materials
918-832-1566
6205 E 15th Street Tulsa, OK, 74112
Tulsa, OK
 
The Home Depot
(918)583-3400
901 S Elgin Avenue
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)459-3700
9808 East 71st
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)376-9975
9450 N 129th East Ave
Owasso, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Best Electric & Hardware Company
(918) 743-3763
3647 S. Peoria
Tulsa, OK
 
Midtown Hardware
(918) 743-3344
4311 E 31st
Tulsa, OK
 
Data Provided by:

Shaper or Router Table?

Shaper or Router Table?




Q. I'm thinking about starting a side business building custom doors. Should I consider investing in a shaper or use my router table?

 

Shaper cutters are larger and last longer than router bits.  The heavy weight large-diameter shaper cutter is designed to remove large amounts of material.

A. Get a shaper. Simply stated, the shaper produces more in less time than a router can. A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis. A 1-1/2-hp shaper will actually remove more wood than a 3-1/2-hp router. That's because routers have lightweight universal motors designed for handheld use that develop low torque. A shaper uses an induction motor designed for continuous, heavy-duty use with torque to spare. Torque is what allows a shaper to hog off two to three times as much wood as a router can in a single pass. You'll still need a good router table setup. Small-diameter bits need the high rpm to make a clean cut. Although shapers have adapters that allow you to run router bits, they don't spin them fast enough for an optimal cut.


Click here to read the rest of the article from American Woodworker