American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Shaper or Router Table? Winsted CT

A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis.

The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Berkshire Products, Inc.
(413) 229-7919
884 Ashley Falls Rd PO Box 591
Sheffield, MA

Data Provided by:
Lowe's
(860) 618-4273
420 Winsted Road
Torrington, CT
Hours
M-SA 6 am - 10 pm
SU 7 am - 8 pm

Montana's Hardware Inc
(860) 658-1085
1414 Hopmeadow St
Simsbury, CT
 
The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Park Place Hardware
(860) 379-4274
11 Park Pl
Winsted, CT
 
Goshen Hardware Inc
(860) 491-3087
59 Torrington Rd
Goshen, CT
 
C A Lindell True Value Hdw & Lumber
(860) 824-5443
59 Church St
Canaan, CT
 
Data Provided by:

Shaper or Router Table?

Shaper or Router Table?




Q. I'm thinking about starting a side business building custom doors. Should I consider investing in a shaper or use my router table?

 

Shaper cutters are larger and last longer than router bits.  The heavy weight large-diameter shaper cutter is designed to remove large amounts of material.

A. Get a shaper. Simply stated, the shaper produces more in less time than a router can. A 3-1/2-hp router table setup can handle the occasional kitchen and, coupled with today's router bits, is even capable of making full-size, 1-3/4-in.-thick exterior doors. But a router is not designed for large-scale wood removal on a continuous basis. A 1-1/2-hp shaper will actually remove more wood than a 3-1/2-hp router. That's because routers have lightweight universal motors designed for handheld use that develop low torque. A shaper uses an induction motor designed for continuous, heavy-duty use with torque to spare. Torque is what allows a shaper to hog off two to three times as much wood as a router can in a single pass. You'll still need a good router table setup. Small-diameter bits need the high rpm to make a clean cut. Although shapers have adapters that allow you to run router bits, they don't spin them fast enough for an optimal cut.


Click here to read the rest of the article from American Woodworker