American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Sharpening Jig Kelso WA

When making this sharpening jig it’s important to make the slots at the correct angle so the bevels of the blades lay perfectly horizontal. This way the sandpaper will have even contact. Here you will learn how to make your own shop made jigs for woodworking. You also get the option of choosing to buy one of the many different sharpening jig power tools at the hardware supply stores in Kelso, WA listed below.

The Home Depot
(360)578-1030
580 Seventh Avenue
Longview, WA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Kelso True Value Hardware
(360) 636-3300
300 Oak St
Kelso, WA
 
Longview Ace Hardware
(360) 501-6001
600 Triangle Mall
Longview, WA
 
Bobs True Value Hdwe
(360) 425-3870
1111 Hudson St
Longview, WA
 
Woodland Ace Hardware
(360) 225-6526
1325 Lewis River Rd
Woodland, WA
 
Three Rivers Mall
(360) 575-6004
341 Three Rivers Dr
Kelso, WA
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-20
Sat:10-19
Sun:11-18
Store Features
Mon:10-20
Tue:10-20
Wed:10-20
Thu:10-20
Fri:10-20
Sat:10-19
Sun:11-18

Lowe's of Longview, WA
360-577-7060
2850 Ocean Beach Highway Longview, WA, 98632
Longview, WA
 
Lowe's
(360) 577-7060
2850 Ocean Beach Highway
Longview, WA
Hours
M-SA 6 am - 10 pm
SU 7 am - 9 pm

Rainier True Value
(503) 556-3171
102 A Street West
Rainier, OR
 
Dahlgren's Do it Best Building
(503) 397-0086
58351 Columbia River Hwy
St Helens, OR
 

Sharpening Jig

Simple Sharpening Jig

I’ve tried several different shop-made jigs for sharpening my jointer and planer knives but this one has proved the simplest to use and make. 

When making this sharpening jig it’s important to make the slots at the correct angle so the bevels of the blades lay perfectly horizontal. This way the sandpaper will have even contact. My jointer blades required a 38-degree angle but check yours because it may be different. 

I also had to saw the angled slots with the board on its edge. That’s because my tablesaw (like most) tilts to only 45 degrees. This is not far enough for the slot to be cut with the board laying flat. Cutting it on its edge solves this problem. Take a look at your saw and you will see what I mean. Double-check the angle of your jointer knives and saw the slots to match. I added a blade guard to keep things safe.

For the sanding block I used chunks of 3/4-in. MDF with sheets of silicon carbide sandpaper attached with spray-on adhesive. I started with 220 grit and worked my way up to 600 grit for a final honing. 


Click here to read the rest of the article from American Woodworker