American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Sharpening Jig Ludington MI

When making this sharpening jig it’s important to make the slots at the correct angle so the bevels of the blades lay perfectly horizontal. This way the sandpaper will have even contact. Here you will learn how to make your own shop made jigs for woodworking. You also get the option of choosing to buy one of the many different sharpening jig power tools at the hardware supply stores in Ludington, MI listed below.

The Home Depot
(231)843-9108
3865 W US 10
Ludington, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Ludington
231-843-8788
4905 West US 10 Ludington, MI, 49431
Ludington, MI
 
Briggs True Value Hardware
(231) 845-7318
5840 West Us 10
Ludington, MI
 
Manistee - Dlr In Kmart
(231) 723-2326
1560 Us 31 South
Manistee, MI
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:10-15
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:10-15

Fastenal- Manistee
231-398-0737
297 First St Manistee, MI, 49660
Manistee, MI
 
Lowe's
(231) 480-5100
4460 West Us 10
Ludington, MI
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Lowe's of Ludington
231-480-5400
4460 West US 10 Ludington, MI, 49431
Ludington, MI
 
Wahr Hardware
(231) 723-8335
87 Division
Manistee, MI
 
Manistee Ace Hardware
(231) 723-9145
1425 US Highway 31 S
Manistee, MI
 
Family Farm And Home
(231) 722-8335
1183 Us 31
Manistee, MI
 

Sharpening Jig

Simple Sharpening Jig

I’ve tried several different shop-made jigs for sharpening my jointer and planer knives but this one has proved the simplest to use and make. 

When making this sharpening jig it’s important to make the slots at the correct angle so the bevels of the blades lay perfectly horizontal. This way the sandpaper will have even contact. My jointer blades required a 38-degree angle but check yours because it may be different. 

I also had to saw the angled slots with the board on its edge. That’s because my tablesaw (like most) tilts to only 45 degrees. This is not far enough for the slot to be cut with the board laying flat. Cutting it on its edge solves this problem. Take a look at your saw and you will see what I mean. Double-check the angle of your jointer knives and saw the slots to match. I added a blade guard to keep things safe.

For the sanding block I used chunks of 3/4-in. MDF with sheets of silicon carbide sandpaper attached with spray-on adhesive. I started with 220 grit and worked my way up to 600 grit for a final honing. 


Click here to read the rest of the article from American Woodworker