American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Sharpening Jig Sevierville TN

When making this sharpening jig it’s important to make the slots at the correct angle so the bevels of the blades lay perfectly horizontal. This way the sandpaper will have even contact. Here you will learn how to make your own shop made jigs for woodworking. You also get the option of choosing to buy one of the many different sharpening jig power tools at the hardware supply stores in Sevierville, TN listed below.

The Home Depot
(865)428-0116
128 Allensville Road
Sevierville, TN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Jeffries Fine Lumber
(865) 573-5876
8807 Valgro Road
Knoxville, TN

Data Provided by:
Fastenal- Sevierville
865-908-7554
1012 Old Knoxville Hwy Ste 1 Sevierville, TN, 37862
Sevierville, TN
 
LOWE'S OF SEVIERVILLE, TENN.
865 453-3115
610 WINFIELD DUNN PKWY SEVIERVILLE, TN, 37876
Sevierville, TN
 
Trentham's Ace Hardware
(865) 436-5173
1025 E Parkway
Gatlinburg, TN
 
The Home Depot
(865)573-1457
140 Green Road
Knoxville, TN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Kmart 9735 / Cross Merch
(865) 428-0014
217 Forks Of River Pkwy
Sevierville, TN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Blalock Hardware Co Inc
(423) 453-3601
703 E Gate Road
Sevierville, TN
 
Lowe's
(865) 453-3115
610 Winfield Dunn Parkway
Sevierville, TN
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Lowe's
(865) 475-1361
638 E. Broadway Boulevard
Jefferson City, TN
Hours
M-SA 7 am - 9 pm
SU 9 am - 7 pm

Data Provided by:

Sharpening Jig

Simple Sharpening Jig

I’ve tried several different shop-made jigs for sharpening my jointer and planer knives but this one has proved the simplest to use and make. 

When making this sharpening jig it’s important to make the slots at the correct angle so the bevels of the blades lay perfectly horizontal. This way the sandpaper will have even contact. My jointer blades required a 38-degree angle but check yours because it may be different. 

I also had to saw the angled slots with the board on its edge. That’s because my tablesaw (like most) tilts to only 45 degrees. This is not far enough for the slot to be cut with the board laying flat. Cutting it on its edge solves this problem. Take a look at your saw and you will see what I mean. Double-check the angle of your jointer knives and saw the slots to match. I added a blade guard to keep things safe.

For the sanding block I used chunks of 3/4-in. MDF with sheets of silicon carbide sandpaper attached with spray-on adhesive. I started with 220 grit and worked my way up to 600 grit for a final honing. 


Click here to read the rest of the article from American Woodworker