American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Sliding Door Bookcase Clinton MS

Glass doors make a bookcase, but doors that swing on hinges are a pain to install. Ditto for doors that lift open and slide back—on a Barrister’s bookcase, for example. Regular sliding doors are much easier to install. In addition, they’re ideal for a bookcase designed to fit in a space where swinging doors might get in the way.

The Home Depot
(601)924-1332
5000 Hampstead Blvd
Clinton, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(601)952-0740
6325 I-55 North
Jackson, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(601)825-1427
200 Orleans Way
Brandon, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Revell Ace Hardware
(601) 924-4510
730 Clinton Pkwy
Clinton, MS
 
Lowe's
(601) 923-4448
2250 Greenway Drive
Jackson, MS
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Home Depot
(601) 924-1332
5000 Hampstead St
Clinton, MS
 
The Home Depot
(601)856-4660
211 Colony Way
Madison, MS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Home Depot
(601) 825-1427
200 Orleans Way
Brandon, MS
 
Metro Center
(601) 360-0611
1400 Metrocenter
Jackson, MS
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:12-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:12-18

Lowe's of West Jackson, MS
601-923-4448
2250 Greenway Drive Jackson, MS, 39204
Jackson, MS
 

Sliding Door Bookcase

Sliding Door Bookcase

Dust-Free Display and No Hinges to Mount!

By Seth Keller

Glass doors make a bookcase, but doors that swing on hinges are a pain to install. Ditto for doors that lift open and slide back—on a Barrister’s bookcase, for example. Regular sliding doors are much easier to install. In addition, they’re ideal for a bookcase designed to fit in a space where swinging doors might get in the way. 

This bookcase features super-smooth sliding door hardware that installs in minutes (see “Euro-Style Sliding Door Hardware”). The shelves are generously deep and widely spaced. Following the lead of Arts and Crafts era builders, my design incorporates elements inspired by traditional Asian furniture.

Building this project requires two sheets of walnut plywood (one 3/4-in. thick and one 1/4-in. thick) and about 40 bd. ft. of 5/4 walnut. The total cost, including glass and hardware (see Sources) is about $600. 

Build the Cabinet

1. Start by cutting the plywood panels and shelves to final size (Fig. A, A1-A4 and Cutting List).  

2. Cut grooves for the sliding door tracks in the top and middle panels (Photo 1 and Fig. G,  Cut the first groove in each panel, then reposition the fence and cut the second grooves).

3. Instead of cutting both cabinet sides (A5) to final size, cut one blank twice as wide as the sides, plus 1/8-in. Rip this blank in half after you’ve routed the dadoes, to create the sides (Photo 2). This method saves time and assures perfectly aligned dadoes. Plywood thickness is often undersize, so you may need a special bit to rout the dadoes (Fig. C and Sources). 

4. Rout dadoes for the drawer dividers (A6) in the middle and bottom panels (Fig. B). 

5. Rabbet the cabinet sides and the top and bottom panels for the 1/4-in. plywood back.

6. Glue the cabinet sides and panels together (Photo 3). The top and bottom panels run the full depth of the cabinet. The middle panel aligns with the rabbet at the back. Use cauls to evenly distribute the clamping pressure.  

7. Glue in the shelves. They slide in from the back. Make sure their back edges are flush with the rabbets for the cabinet’s back. 

8. Glue on the shelf edging (A7). The edging hides the  stopped dadoes in the cabinet’s sides.

9. Glue in the drawer dividers. 

10. Fit and install the sliding door track.

11. Cut and fit the plywood back (A8), but don’t install it.

12. Glue spacers (A9) on the top panel. They allow fastening the top.

13. Glue up the top (A10) and cut it to final length and width. Then rout a 45-degree bevel around the front and sides. 

Photo 1: Saw grooves for the sliding door tracks in the top 

and middle cabinet panels. Caution: The blade guard must be removed for this operation. 

Photo 2: Rip both cabinet sides from a single wide panel in which all the dadoes have already been routed. This method guarante...

Click here to read the rest of the article from American Woodworker