American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Sliding Door Bookcase Vidalia GA

Glass doors make a bookcase, but doors that swing on hinges are a pain to install. Ditto for doors that lift open and slide back—on a Barrister’s bookcase, for example. Regular sliding doors are much easier to install. In addition, they’re ideal for a bookcase designed to fit in a space where swinging doors might get in the way.

Lowe's
(912) 277-2000
3209 East First Street
Vidalia, GA
Hours
M-SA 7 am - 9 pm
SU 8 am - 8 pm

Ace Hardware
(912) 557-6785
223 W Brazell St
Reidsville, GA
 
The Home Depot
(404)841-5608
2525 Piedmont Road NE
Atlanta, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(706)376-1748
1700 Anderson Hwy
Hartwell, GA
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(678)432-5827
1750 Jonesboro Rd
McDonough, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Vidalia - Auth Hometown
(912) 538-9040
2707 E First St
Vidalia, GA
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:10-19
Tue:10-19
Wed:10-19
Thu:10-19
Fri:10-19
Sat:9-18
Sun:13-18
Store Features
Mon:10-19
Tue:10-19
Wed:10-19
Thu:10-19
Fri:10-19
Sat:9-18
Sun:13-18

Dennard True Value Hardware
(800) 642-7392
119 2Nd St N
Soperton, GA

Data Provided by:
The Home Depot
(478)272-4869
1833 Veterans Blvd
Dublin, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(770)606-0298
100 Gentil Street
Cartersville, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(404)315-0015
2295 Lawrenceville Hwy
Decatur, GA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Sliding Door Bookcase

Sliding Door Bookcase

Dust-Free Display and No Hinges to Mount!

By Seth Keller

Glass doors make a bookcase, but doors that swing on hinges are a pain to install. Ditto for doors that lift open and slide back—on a Barrister’s bookcase, for example. Regular sliding doors are much easier to install. In addition, they’re ideal for a bookcase designed to fit in a space where swinging doors might get in the way. 

This bookcase features super-smooth sliding door hardware that installs in minutes (see “Euro-Style Sliding Door Hardware”). The shelves are generously deep and widely spaced. Following the lead of Arts and Crafts era builders, my design incorporates elements inspired by traditional Asian furniture.

Building this project requires two sheets of walnut plywood (one 3/4-in. thick and one 1/4-in. thick) and about 40 bd. ft. of 5/4 walnut. The total cost, including glass and hardware (see Sources) is about $600. 

Build the Cabinet

1. Start by cutting the plywood panels and shelves to final size (Fig. A, A1-A4 and Cutting List).  

2. Cut grooves for the sliding door tracks in the top and middle panels (Photo 1 and Fig. G,  Cut the first groove in each panel, then reposition the fence and cut the second grooves).

3. Instead of cutting both cabinet sides (A5) to final size, cut one blank twice as wide as the sides, plus 1/8-in. Rip this blank in half after you’ve routed the dadoes, to create the sides (Photo 2). This method saves time and assures perfectly aligned dadoes. Plywood thickness is often undersize, so you may need a special bit to rout the dadoes (Fig. C and Sources). 

4. Rout dadoes for the drawer dividers (A6) in the middle and bottom panels (Fig. B). 

5. Rabbet the cabinet sides and the top and bottom panels for the 1/4-in. plywood back.

6. Glue the cabinet sides and panels together (Photo 3). The top and bottom panels run the full depth of the cabinet. The middle panel aligns with the rabbet at the back. Use cauls to evenly distribute the clamping pressure.  

7. Glue in the shelves. They slide in from the back. Make sure their back edges are flush with the rabbets for the cabinet’s back. 

8. Glue on the shelf edging (A7). The edging hides the  stopped dadoes in the cabinet’s sides.

9. Glue in the drawer dividers. 

10. Fit and install the sliding door track.

11. Cut and fit the plywood back (A8), but don’t install it.

12. Glue spacers (A9) on the top panel. They allow fastening the top.

13. Glue up the top (A10) and cut it to final length and width. Then rout a 45-degree bevel around the front and sides. 

Photo 1: Saw grooves for the sliding door tracks in the top 

and middle cabinet panels. Caution: The blade guard must be removed for this operation. 

Photo 2: Rip both cabinet sides from a single wide panel in which all the dadoes have already been routed. This method guarante...

Click here to read the rest of the article from American Woodworker