American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Spiral-Cutterhead Planer Fort Morgan CO

If you've heard the buzz about carbide spiral cutterheads on jointers, you'll definitely want to check out the G1021X2 15-in. planer from Grizzly. This planer's cutterhead has dozens of small carbide cutters arranged in a spiral pattern (photo, right), and far outperforms cutterheads with standard HSS knives.

Bloedorn Lumber Building Mtrls
(970) 867-5646
130 State Street
Fort Morgan, CO
 
Fastenal- Ft. Morgan
970-867-4475
19873 US Highway 34 Ft. Morgan, CO, 80701
Ft. Morgan, CO
 
Murdoch's Ranch & Home Supply
(970) 542-1515
1207 W. Platte Avenue
Fort Morgan, CO
 
Country Do it Best Hardware
(970) 483-7312
218 Main St.
Wiggins, CO
 
Woodcraft - Loveland, CO
(970) 292-5940
3718 Draft Horse Drive
Loveland, CO

Data Provided by:
Mr. D'S Ace Home Center
(970) 867-3303
1000 East Platte Avenue
Fort Morgan, CO
 
Ft Morgan - Auth Hometown
(970) 867-5200
1997 E Piatte Ave
Fort Morgan, CO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Farm & Home Hardware
(970) 842-2879
122 Custer St
Brush, CO
 
The Home Depot
(719)471-0054
2250 Southgate Rd
Colorado Springs, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(303)255-8000
10003 Grant Street
Denver, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Spiral-Cutterhead Planer

Spiral-Cutterhead Planer

    

If you've heard the buzz about carbide spiral cutterheads on jointers, you'll definitely want to check out the G1021X2 15-in. planer from Grizzly. This planer's cutterhead has dozens of small carbide cutters arranged in a spiral pattern (photo, right), and far outperforms cutterheads with standard HSS knives. Woods that are notoriously tough to plane, such as birdseye maple, come out as smooth as a baby's bottom. The cutters have four sides and are indexed; when they get dull, you simply unscrew all the cutters and rotate them one-quarter turn. Set-up doesn't get much easier than that! This planer has a 18-amp, 3 HP 220V motor, which is enough power to remove up to 1/8-in. of material in one pass. It has two feed rates (16 FPM and 20 FPM) and handles stock up to 6-1/8 inches thick. With its cast iron extensions, the planer's table measures 51 inches long. This industrial-strength machine weighs over 500 lbs.

Source:
Grizzly Industrial, (800) 523-4777, www.grizzly.com Extreme Series ,15” planer #G1021X2, $1,500 plus shipping.


Click here to read the rest of the article from American Woodworker