Spiral-Cutterhead Planer Keene NH
Waste services, porta potty, jetting, portable toilet rentals, septic solutions, locating septic tanks, septic tank repair, septic tank cleaning, septic tank filters, septic tank services, snaking, camera service, septic trouble shooting, hand wash station rentals, septic design, septic installation, septic maintenance
24/7 Emergency Service
M-SA 6 am - 9 pm
SU 8 am - 7 pm
If you've heard the buzz about carbide spiral cutterheads on jointers, you'll definitely want to check out the G1021X2 15-in. planer from Grizzly. This planer's cutterhead has dozens of small carbide cutters arranged in a spiral pattern (photo, right), and far outperforms cutterheads with standard HSS knives. Woods that are notoriously tough to plane, such as birdseye maple, come out as smooth as a baby's bottom. The cutters have four sides and are indexed; when they get dull, you simply unscrew all the cutters and rotate them one-quarter turn. Set-up doesn't get much easier than that! This planer has a 18-amp, 3 HP 220V motor, which is enough power to remove up to 1/8-in. of material in one pass. It has two feed rates (16 FPM and 20 FPM) and handles stock up to 6-1/8 inches thick. With its cast iron extensions, the planer's table measures 51 inches long. This industrial-strength machine weighs over 500 lbs.
Grizzly Industrial, (800) 523-4777, www.grizzly.com Extreme Series ,15” planer #G1021X2, $1,500 plus shipping.