American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Spiral-Cutterhead Planer Knightdale NC

If you've heard the buzz about carbide spiral cutterheads on jointers, you'll definitely want to check out the G1021X2 15-in. planer from Grizzly. This planer's cutterhead has dozens of small carbide cutters arranged in a spiral pattern (photo, right), and far outperforms cutterheads with standard HSS knives.

The Home Depot
(919)217-3093
1020 Shopps At Midway
Knightdale, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Klingspor’s Woodworking Shop of Raleigh
(919) 876-0707
3141 Capital Blvd.Capital Square
Raleigh, NC

Data Provided by:
The Home Depot
(919)844-7418
9517 Strickland Rd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Raleigh/Durham, NC
(919) 781-1911
4317 Pleasant Valley Road
Raleigh, NC

Data Provided by:
The Home Depot
(919)387-6554
1000 Vision Dr
Apex, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)878-8771
4901 Capital Blvd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)661-1393
2540 Timber Dr
Garner, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)562-2202
11915 Retail Drive
Wake Forest, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)851-5554
2031 Walnut Street
Cary, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Robbins Custom Sawing and Lumber for Natural Edge Slabs
(919) 779-0719
2200 Bull Run Drive
Apex, NC

Data Provided by:
Data Provided by:

Spiral-Cutterhead Planer

Spiral-Cutterhead Planer

    

If you've heard the buzz about carbide spiral cutterheads on jointers, you'll definitely want to check out the G1021X2 15-in. planer from Grizzly. This planer's cutterhead has dozens of small carbide cutters arranged in a spiral pattern (photo, right), and far outperforms cutterheads with standard HSS knives. Woods that are notoriously tough to plane, such as birdseye maple, come out as smooth as a baby's bottom. The cutters have four sides and are indexed; when they get dull, you simply unscrew all the cutters and rotate them one-quarter turn. Set-up doesn't get much easier than that! This planer has a 18-amp, 3 HP 220V motor, which is enough power to remove up to 1/8-in. of material in one pass. It has two feed rates (16 FPM and 20 FPM) and handles stock up to 6-1/8 inches thick. With its cast iron extensions, the planer's table measures 51 inches long. This industrial-strength machine weighs over 500 lbs.

Source:
Grizzly Industrial, (800) 523-4777, www.grizzly.com Extreme Series ,15” planer #G1021X2, $1,500 plus shipping.


Click here to read the rest of the article from American Woodworker