American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Stainless Steel Sanding Discs Apex NC

When I first looked at the Microplane stainless steel sanding discs I thought, “There's no way that can work. It'll just tear up the wood.” But now that I've logged lots of hours of sanding with this product, I'm a believer. According to the manufacturer this product will remove wood five times faster than a conventional abrasive, while outlasting it seven times.

The Home Depot
(919)387-6554
1000 Vision Dr
Apex, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)851-5554
2031 Walnut Street
Cary, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Raleigh/Durham, NC
(919) 781-1911
4317 Pleasant Valley Road
Raleigh, NC

Data Provided by:
The Home Depot
(919)844-7418
9517 Strickland Rd
Raleigh, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Klingspor’s Woodworking Shop of Raleigh
(919) 876-0707
3141 Capital Blvd.Capital Square
Raleigh, NC

Data Provided by:
Robbins Custom Sawing and Lumber for Natural Edge Slabs
(919) 779-0719
2200 Bull Run Drive
Apex, NC

Data Provided by:
The Home Depot
(919)552-2881
901 E Broad Street
Fuquay Varina, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)661-1393
2540 Timber Dr
Garner, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)419-0208
3701 MT Moriah Road
Durham, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(919)217-3093
1020 Shopps At Midway
Knightdale, NC
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Stainless Steel Sanding Discs

Stainless Steel Sanding Discs

    

When I first looked at the Microplane stainless steel sanding discs I thought,  “There's no way that can work.  It'll just tear up the wood.” But now that I've logged lots of hours of sanding with this product, I'm a believer. According to the manufacturer this product will remove wood five times faster than a conventional abrasive, while outlasting it seven times. This helps justify the cost - about $5 per disc, which would buy about three discs of conventional high-quality abrasive.  So, is it worth the investment?  Yes. Although I wasn't able to quantify the manufacturer's claim about the discs cutting wood faster, I would have gone through numerous changes of regular sandpaper in the same length of time that I used a single Microplane disc. The discs are available in 40-, 80-, and 120-grit. On red oak and pine I found the surface left behind by the 120-grit disc slightly rougher than a conventional abrasive. The discs come in 5-in. hook-and-loop, and attach to any standard 5-in. hook-and-loop sanding base. The discs will work with sanders that have through-the-base dust collection.  Microplane discs are designed for raw wood only, not finished surfaces.

Source
Microplane (800) 555-2767, www.microplane.com,Stainless Steel Sanding Discs, $9.95 for 2 discs.


Click here to read the rest of the article from American Woodworker