American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Steam Bent Music Stand Rosenberg TX

This music stand requires only five board feet of lumber, but we recommend buying at least four times as much, so you can practice and refine your bending techniques. Read on to learn more information.

The Home Depot
(281)239-2777
24400 Commercial Drive
Rosenberg, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(281)242-9200
15505 SW Freeway
Sugar Land, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(281)498-6445
6800 W Sam Houston
Houston, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(281)403-1397
5900 Hwy 6 South
Missouri City, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Fastenal- Rosenburg
281-239-8364
1212 Avenue H Rosenburg, TX, 77471
Rosenburg, TX
 
The Home Depot
(281)693-8420
6850 S Fry Road
Katy, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(281)870-9369
2828 South Highway 6
Houston, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(281)599-9170
1111 Fry Rd
Katy, TX
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's
(281) 232-1838
28005 Southwest Freeway
Rosenberg, TX
Hours
M-SA 7 am - 9 pm
SU 8 am - 7 pm

Ace Hardware
(281) 342-5458
3714 Avenue I
Rosenberg, TX
 

Steam Bent Music Stand

Steam Bent Music Stand

“Learning to bend wood with steam takes practice, just like playing an instrument.”  By Seth Keller

 

Bending wood with steam always intrigued me, but I never tried it. The process seemed mysterious, complicated and maybe even dangerous. But one day a beat-up old music stand motivated me to give steam bending a try. My first two or three attempts weren’t successful, but I learned with each failure and became more confident with each attempt. 

One thing I can tell you is that steam bending is as much art as it is science. So many variables affect the way each piece of wood bends, the outcome can be difficult to predict. I’ve found that the best way to achieve consistent results is to control as many variables as you can.

First, use the right wood. White oak, the species I chose, is one of the best. Straight grain is a must and each piece should be as defect-free as possible.  Many experts recommend using green wood, but once I refined my technique, I had good luck bending my kiln-dried white oak boards. 

A bending jig and a pair of drying forms are crucial for success. Their curves must be smooth and consistent. The jig and forms I used for this project came from the scraps of 3/4”-thick exterior grade plywood that were left after I built my steam box. I laminated two pieces of plywood to make some of the curved parts; others are just one piece thick. 

Once the wood comes out of the steam box, it begins to loose its flexibility in a minute or less, so you need to work fast. It’s best to engage a friend’s help and choreograph all of the steps by making dry runs. 

This music stand requires only five board feet of lumber, but I recommend buying at least four times as much, so you can practice and refine your bending techniques. I resawed 8/4 stock to make all the parts.

Tailor Your Design 

While dreaming up and designing my stand (Photos 1 and 2), I made some critical decisions. To simplify the construction, I decided the stand would be non-adjustable. Then I decided it would be used when I was seated. Finally, I adjusted its backward pitch to suit my playing posture. The bending jig and drying forms can be easily modified if you want to make aesthetic changes. 

Photo 1: After many years together, my flimsy music stand and I experienced the ultimate falling out. Rather than buying another utilitarian stand, I got the crazy notion to design and build one that would, somehow, visually represent the music I play.

Photo 2: I drew full size sketches to find inspiration. I wanted the stand to echo the blues music I love, so I decided to bend the wood, just like those soulful blue notes. This seemed the perfect opportunity to try steam bending, something I’d always wanted to do.

My Big Break

At first, most of my bending experiments failed (Photos 3 and 4). The turning point came when I discovered Le...

Click here to read the rest of the article from American Woodworker