American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Super-Sized Excalibur Scroll Saw Lake Geneva WI

The tilting head mechanism makes scrolling at an angle a dream. A large knob on the front of the machine controls a rack and pinion mechanism for tilting the saw up to 45-degrees left and right with positive stops at 22.5-degrees, 30-degrees and 45-degrees. Release the lock lever and turn the knob to adjust.

The Home Depot
(262)248-6297
550 N Edwards Blvd
Lake Geneva, WI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(815)385-9503
2461 N Richmond Rd
McHenry, IL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(847)973-8196
2731 Hartigan Rd
Volo, IL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Dunn Lumber&true Value Hdw.
(262) 248-4459
826 North St
Lake Geneva, WI
 
Woller True Value
(262) 723-2286
455 E Geneva St
Elkhorn, WI
 
BADGER HARDWOODS OF WISCONSIN, LTD.
(262) 275-1162
N1517 US Highway 14
Walworth, WI

Data Provided by:
The Home Depot
(262)363-7141
232 E Wolf Run
Mukwonago, WI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Lake Geneva - Auth Hometown
(262) 248-8571
200 Edwards Blvd Ste C
Lake Geneva, WI
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-21
Tue:9-21
Wed:9-21
Thu:9-21
Fri:9-21
Sat:9-18
Sun:10-16
Store Features
Mon:9-21
Tue:9-21
Wed:9-21
Thu:9-21
Fri:9-21
Sat:9-18
Sun:10-16

Heyer True Value Hdw.
(262) 275-6133
200 Hwy 67 North
Walworth, WI
 
Jackson's Do it Best Hardware
(262) 723-3338
635 N Wisconsin Street
Elkhorn, WI
 
Data Provided by:

Super-Sized Excalibur Scroll Saw

Super-Sized Excalibur Scroll Saw

The tilting head mechanism makes scrolling at an angle a dream. A large knob on the front of the machine controls a rack and pinion mechanism for tilting the saw up to 45-degrees left and right with positive stops at 22.5-degrees, 30-degrees and 45-degrees. Release the lock lever and turn the knob to adjust.

 

The flip-up arm simplifies pierced cuts and blade changes.  Just unlock the lower blade holder, lift the arm and the blade out of the piece, move to the next hole, lower the blade, lock it in and go.

The new Excalibur EX-30 scroll saw is finally here. It's identical to the EX-21 except bigger. It boasts a 30-in. throat and has a large 14-in. x 32-1/2-in. table. A larger table means better support for your work and the deep throat gives you more swing for larger projects. Of course, the EX-21 also has lots to offer with a 21-in. deep throat and a 13-1/2-in. x 23-1/2-in. table. Both saws have 2-in.-thick stock capacity and feature Excalibur's famous parallel link drive system that keeps the blade moving in a near-straight up-and-down motion. Angled cuts are accomplished by tilting the head (top photo) rather than the table. If you've ever done a lot of scrolling on a tilted table, you can imagine how nice it is to keep the stock flat while cutting. Excalibur's lifting arm feature makes blade changes and pierced cuts a snap (bottom photo). Power, speed and blade tension controls are all within 2-in of each other and right up front where you want them. Blade changes and adjustments are all tool-free. The machine's designers have even thought to include a series of holes in the base to hold blade storage tubes.

Source:
General International, www.general.ca, EX-30 Scroll Saw, $900; EX-21 Scrollsaw, $750.

Click here to read the rest of the article from American Woodworker