American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Super-Sized Excalibur Scroll Saw North Brunswick NJ

The tilting head mechanism makes scrolling at an angle a dream. A large knob on the front of the machine controls a rack and pinion mechanism for tilting the saw up to 45-degrees left and right with positive stops at 22.5-degrees, 30-degrees and 45-degrees. Release the lock lever and turn the knob to adjust.

The Home Depot
(732)438-5980
4095 US Route 1
Monmouth Junction, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(609)987-8686
701 Nassau Park Blvd
Princeton, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(908)222-7700
1515 Route 22
Watchung, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(609)585-0411
750 Highway Rt 130
Robbinsville, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Willard Brothers Lumber
(800) 320-6519
300 Basin Road
Trenton, NJ

Data Provided by:
AGINCOURT
(908) 874-8234
212 E Mountain Rd
Hillsborough, NJ

Data Provided by:
The Home Depot
(908)252-0101
736 Route 202 South
Bridgewater, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(609)426-2441
739 Route 33 West
E Windsor, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(609)393-3697
1621 N Olden Avenue
Ewing, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(908)782-2577
244 Highway 202
Flemington, NJ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Super-Sized Excalibur Scroll Saw

Super-Sized Excalibur Scroll Saw

The tilting head mechanism makes scrolling at an angle a dream. A large knob on the front of the machine controls a rack and pinion mechanism for tilting the saw up to 45-degrees left and right with positive stops at 22.5-degrees, 30-degrees and 45-degrees. Release the lock lever and turn the knob to adjust.

 

The flip-up arm simplifies pierced cuts and blade changes.  Just unlock the lower blade holder, lift the arm and the blade out of the piece, move to the next hole, lower the blade, lock it in and go.

The new Excalibur EX-30 scroll saw is finally here. It's identical to the EX-21 except bigger. It boasts a 30-in. throat and has a large 14-in. x 32-1/2-in. table. A larger table means better support for your work and the deep throat gives you more swing for larger projects. Of course, the EX-21 also has lots to offer with a 21-in. deep throat and a 13-1/2-in. x 23-1/2-in. table. Both saws have 2-in.-thick stock capacity and feature Excalibur's famous parallel link drive system that keeps the blade moving in a near-straight up-and-down motion. Angled cuts are accomplished by tilting the head (top photo) rather than the table. If you've ever done a lot of scrolling on a tilted table, you can imagine how nice it is to keep the stock flat while cutting. Excalibur's lifting arm feature makes blade changes and pierced cuts a snap (bottom photo). Power, speed and blade tension controls are all within 2-in of each other and right up front where you want them. Blade changes and adjustments are all tool-free. The machine's designers have even thought to include a series of holes in the base to hold blade storage tubes.

Source:
General International, www.general.ca, EX-30 Scroll Saw, $900; EX-21 Scrollsaw, $750.

Click here to read the rest of the article from American Woodworker

Local Events

Philadelphia Flower Show 2018
Dates: 3/4/2018 – 3/11/2018
Location:
Pennsylvania Convention Center Philadelphia
View Details