American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Super-Sized Excalibur Scroll Saw Rutland VT

The tilting head mechanism makes scrolling at an angle a dream. A large knob on the front of the machine controls a rack and pinion mechanism for tilting the saw up to 45-degrees left and right with positive stops at 22.5-degrees, 30-degrees and 45-degrees. Release the lock lever and turn the knob to adjust.

The Home Depot
(802)786-6900
299 US Rt 4 East
Rutland, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Goodro True Value Of Killington
(802) 422-3469
Rt 4
Killington, VT
 
Gilmore Home Center
(802) 468-5676
Route 4 A
Bomoseen, VT
 
E.c.crosby&sons A True Value Store
(802) 293-5111
49 Mill Rd
Danby, VT
 
NeighborWorks of Western Vermont
(802) 438-2303
110 Marble Street
West Rutland, VT
 
Noble Ace
(802) 773-2758
261 N Main St
Rutland, VT
 
Nail It Down Hardware
(802) 446-2133
34 Maple Street
Wallingford, VT
 
Brandon Lumber & Millwork
(802) 247-6000
11 Grove St
Brandon, VT
 
The Hardware At Rochester
(802) 767-4200
Rt 100 Main Street
Rochester, VT
 
Ben Franklin Fair Haven
(800) 642-7392
111 E Park Pl
Fair Haven, VT

Data Provided by:
Data Provided by:

Super-Sized Excalibur Scroll Saw

Super-Sized Excalibur Scroll Saw

The tilting head mechanism makes scrolling at an angle a dream. A large knob on the front of the machine controls a rack and pinion mechanism for tilting the saw up to 45-degrees left and right with positive stops at 22.5-degrees, 30-degrees and 45-degrees. Release the lock lever and turn the knob to adjust.

 

The flip-up arm simplifies pierced cuts and blade changes.  Just unlock the lower blade holder, lift the arm and the blade out of the piece, move to the next hole, lower the blade, lock it in and go.

The new Excalibur EX-30 scroll saw is finally here. It's identical to the EX-21 except bigger. It boasts a 30-in. throat and has a large 14-in. x 32-1/2-in. table. A larger table means better support for your work and the deep throat gives you more swing for larger projects. Of course, the EX-21 also has lots to offer with a 21-in. deep throat and a 13-1/2-in. x 23-1/2-in. table. Both saws have 2-in.-thick stock capacity and feature Excalibur's famous parallel link drive system that keeps the blade moving in a near-straight up-and-down motion. Angled cuts are accomplished by tilting the head (top photo) rather than the table. If you've ever done a lot of scrolling on a tilted table, you can imagine how nice it is to keep the stock flat while cutting. Excalibur's lifting arm feature makes blade changes and pierced cuts a snap (bottom photo). Power, speed and blade tension controls are all within 2-in of each other and right up front where you want them. Blade changes and adjustments are all tool-free. The machine's designers have even thought to include a series of holes in the base to hold blade storage tubes.

Source:
General International, www.general.ca, EX-30 Scroll Saw, $900; EX-21 Scrollsaw, $750.

Click here to read the rest of the article from American Woodworker