American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Super Souped Up Bandsaw Rutland VT

The G0555X uses ball bearing blade guides above and below the table. Ball bearing guides are especially handy when using wide resaw blades. The saw accepts blades from 92-1/2-in. to 93-1/2-in. long, and 1/8 to 3/4-in. wide. A riser block, which increases the thickness capacity from 6 in. to 12 in. is available, $57.95. Adding the riser block increases the blade’s length to 105 in.

The Home Depot
(802)786-6900
299 US Rt 4 East
Rutland, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Goodro True Value Of Killington
(802) 422-3469
Rt 4
Killington, VT
 
Gilmore Home Center
(802) 468-5676
Route 4 A
Bomoseen, VT
 
E.c.crosby&sons A True Value Store
(802) 293-5111
49 Mill Rd
Danby, VT
 
NeighborWorks of Western Vermont
(802) 438-2303
110 Marble Street
West Rutland, VT
 
Noble Ace
(802) 773-2758
261 N Main St
Rutland, VT
 
Nail It Down Hardware
(802) 446-2133
34 Maple Street
Wallingford, VT
 
Brandon Lumber & Millwork
(802) 247-6000
11 Grove St
Brandon, VT
 
The Hardware At Rochester
(802) 767-4200
Rt 100 Main Street
Rochester, VT
 
Ben Franklin Fair Haven
(800) 642-7392
111 E Park Pl
Fair Haven, VT

Data Provided by:
Data Provided by:

Super Souped Up Bandsaw

Super Souped Up Bandsaw

Grizzly has added some muscle to one of their best-selling 14-in. bandsaws and come up with the new model G0555X machine, $595. I like the large motor (1-1/2-hp, 15-amp), I like the built-in light, I like the tall resaw fence, but what I like most is the large table. At 14-in. x 20-1/2-in. this is one of the largest tables you’ll find on a 14-in. saw. It’s nice to have plenty of real estate to the right and left of the blade. 

Grizzly accomplished such a large table by making it in two pieces. A 5-in. extension on the left side of the table is fastened to the bottom half of the saw. So, when you tilt the table, the extension remains in place and only the main table tilts. Otherwise, you wouldn’t have the clearance to tilt the table all the way to 45-degrees. This is a clever idea that I’ve only seen on one other 14-in. bandsaw.

The G0555X uses ball bearing blade guides above and below the table. Ball bearing guides are especially handy when using wide resaw blades. The saw accepts blades from 92-1/2-in. to 93-1/2-in. long, and 1/8 to 3/4-in. wide. A riser block, which increases the thickness capacity from 6 in. to 12 in. is available, $57.95. Adding the riser block increases the blade’s length to 105 in.

Click here to read the rest of the article from American Woodworker