American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Swingin' Storage Coos Bay OR

To install a panel, insert the longer dowel in the top tool holder until the bottom;dowel;slips into the bottom tool holder. The long top dowel; must extend through both rings of the tool holder to keep the panel from falling out.

Exotic Burl
(541) 396-2333
57304 Fat Elk Road P.O. Box 700
Coquille, OR

Data Provided by:
Farrs True Value Hdwe
(541) 267-2137
880 S 1st St
Coos Bay, OR
 
North Bend - Auth Hometown
(541) 756-7323
1611 Virginia Ave # 514
North Bend, OR
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-20
Tue:9-20
Wed:9-20
Thu:9-20
Fri:9-20
Sat:9-18
Sun:11-18
Store Features
Mon:9-20
Tue:9-20
Wed:9-20
Thu:9-20
Fri:9-20
Sat:9-18
Sun:11-18

Coos Head Do it center
(541) 756-3148
1672 Sherman Avenue
North Bend, OR
 
Coquille Supply
(541) 396-4264
10054 Highway 42, 2 MILES EAST OF COQUILLE CITY
Coquille, OR
 
Kmart 7166 / Cross Merch
(541) 267-2151
3111 Ocean Blvd Se
Coos Bay, OR
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Fastenal- Coos Bay
541-888-8629
1195 Newmark Ave Ste B Coos Bay, OR, 97420
Coos Bay, OR
 
Coos Head Builders Supply
(541) 756-3148
1672 Sherman Ave North Bend, OR, 97459
North Bend, OR
 
Farrs True Value Hardware
(541) 396-3161
220 N Central
Coquille, OR
 
Hometown Hardware
(541) 572-5750
323 Spruce St
Myrtle Point, OR
 
Data Provided by:

Swingin' Storage

Swingin' Storage



I like to store hardware in its original package on a Peg-Board wall in my shop. I've devised some swinging panels for the wall that give me a lot more usable space. To make the panels, you'll need 1/8" Peg-Board, a 3/4" dia. dowel rod, and Peg-Board tool holders.

Make the panels by cutting 12" x 12" pieces from the Peg-Board. For each panel, cut one dowel 2-1/2" long and one 5" long. Cut a 1/8" wide groove in one end of both dowels and slide the dowels onto the panels. Fasten the dowels with screws. 


To install a panel, insert the longer dowel in the top tool holder until the bottom dowel slips into the bottom tool holder. The long top dowel must extend through both rings of the tool holder to keep the panel from falling out. Each pair of tool holders holds up to six panels. 

I also cut a 1/8" wide slot in a 12" length of 2x4 to use as a base for the panels so I can remove a panel from the tool rack and set it on my workbench.

--Mark Thiel



Click here to read the rest of the article from American Woodworker