American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Swingin' Storage Springfield MO

To install a panel, insert the longer dowel in the top tool holder until the bottom;dowel;slips into the bottom tool holder. The long top dowel; must extend through both rings of the tool holder to keep the panel from falling out.

The Home Depot
(417)881-7277
2104 E Independence
Springfield, MO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

H K & W INC
(417) 869-4527
610 W CHESTNUT ST SPRINGFIELD, MO, 65806
Springfield, MO
 
Meeks The Builders Choice
(417) 862-6487
2741 S Scenic
Springfield, MO
 
Herrman Lumber Co - Springfield
(417) 862-2800
1917 S State Hwy Mm
Springfield, MO
 
KEL WELCO DISTRIBUTING/Springfield
(417) 832-8837
423 N Belcrest Ave Springfield, MO, 65802
Springfield, MO
 
Cowan's Ace Hdw
(417) 869-2912
3310 W College Ave, Corner of West Bypass and Chestnut Expressway
Springfield, MO
 
Meeks The Builders Choice
(417) 862-5595
1551 W. Mt. Vernon
Springfield, MO
 
ABC Supply Co.,Inc/Springfield
417-831-1830
3011 W Chestnut Expressway Springfield, MO, 65802
Springfield, MO
 
Kmart 3579 / Cross Merch
(417) 882-8080
3700 S Campbell Ave
Springfield, MO
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

BALLEW SAW & TOOL
(417) 865-7511
325 S Kimbrough Ave Springfield, MO, 65806
Springfield, MO
 

Swingin' Storage

Swingin' Storage



I like to store hardware in its original package on a Peg-Board wall in my shop. I've devised some swinging panels for the wall that give me a lot more usable space. To make the panels, you'll need 1/8" Peg-Board, a 3/4" dia. dowel rod, and Peg-Board tool holders.

Make the panels by cutting 12" x 12" pieces from the Peg-Board. For each panel, cut one dowel 2-1/2" long and one 5" long. Cut a 1/8" wide groove in one end of both dowels and slide the dowels onto the panels. Fasten the dowels with screws. 


To install a panel, insert the longer dowel in the top tool holder until the bottom dowel slips into the bottom tool holder. The long top dowel must extend through both rings of the tool holder to keep the panel from falling out. Each pair of tool holders holds up to six panels. 

I also cut a 1/8" wide slot in a 12" length of 2x4 to use as a base for the panels so I can remove a panel from the tool rack and set it on my workbench.

--Mark Thiel



Click here to read the rest of the article from American Woodworker