American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Tablesaw Template Trick Bridgeville PA

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge.

The Home Depot
(412)220-2241
1025 Washington Pike
Bridgeville, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)494-2844
440 Home Dr
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)824-9406
3550 William Penn Hwy
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)816-1231
102 Aldi Drive
North Versailles, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(724)229-7849
255 Murtland Ave
Washington, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)835-4271
4000 Oxford Drive
Bethel Park, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)650-9460
9971 Mountain View Dr
West Mifflin, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(412)363-9150
400 N Highland Ave
Pittsburgh, PA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Hardwood Emporium
(412) 384-4000
No 1 Chicago Ave
Elizabeth, PA

Data Provided by:
Rockler Woodworking and Hardware #31
(412) 364-7751
7402 McKnight Road
Pittsburgh, PA

Data Provided by:
Data Provided by:

Tablesaw Template Trick

Tablesaw Template Trick

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge. I use double-face tape to attach a template to a slightly oversize workpiece, then push the template along the ledge. The result is a perfectly clean cut-with no router bit tear-out-that precisely follows any template. It's perfectly safe on sides down to 4 in. long.

I used 3/4-in. solid wood to build the fence, but plywood would do as well. The ledge is screwed and glued to the horizontal piece, 1 in. above its base. This gives enough clearance for the blade to be set higher than the 3/4-in.-thick workpiece. On the bandsaw, I rough-cut each workpiece 1/8 in. larger than the template on all sides. Presawing eliminates large offcuts, so there's no chance of kickback. All I get are sawdust and perfect copies of my pattern.


Click here to read the rest of the article from American Woodworker