American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Tablesaw Template Trick Fallon NV

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge.

Louie's Home Center
(775) 423-7008
1855 W Williams Ave, Jerry's Restruant
Fallon, NV
 
Big R
(775) 423-8555
3325 Reno Hwy
Fallon, NV
 
Woodcraft - Reno, NV
(775) 852-9912
7111 S Virginia St
Reno, NV

Data Provided by:
The Home Depot
(702)940-2426
9705 W Charleston Blvd
Las Vegas, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(775)851-9600
6590 S Virginia St
Reno, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Fallon - Auth Hometown
(775) 423-2629
1430 W Williams Ave
Fallon, NV
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:11-16
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-18
Sun:11-16

The Home Depot
(775)738-0455
2955 Mountain City Hwy
Elko, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(775)886-4455
3185 Market Street
Carson City, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(775)851-6000
1001 Steamboat Pkwy
Reno, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(775)674-2900
2955 Northtowne Ln
Reno, NV
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Tablesaw Template Trick

Tablesaw Template Trick

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge. I use double-face tape to attach a template to a slightly oversize workpiece, then push the template along the ledge. The result is a perfectly clean cut-with no router bit tear-out-that precisely follows any template. It's perfectly safe on sides down to 4 in. long.

I used 3/4-in. solid wood to build the fence, but plywood would do as well. The ledge is screwed and glued to the horizontal piece, 1 in. above its base. This gives enough clearance for the blade to be set higher than the 3/4-in.-thick workpiece. On the bandsaw, I rough-cut each workpiece 1/8 in. larger than the template on all sides. Presawing eliminates large offcuts, so there's no chance of kickback. All I get are sawdust and perfect copies of my pattern.


Click here to read the rest of the article from American Woodworker