American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Tablesaw Template Trick Gilbert AZ

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge.

The Home Depot
(480)497-1466
745 S Val Vista Dr
Gilbert, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)396-0227
425 S Val Vista Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)899-5013
1155 W Chandler Blvd
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)461-0251
853 N Dobson Road
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodworkers Source - Store #1
(480) 355-5090
645 W. Elliot Rd
Tempe, AZ

Data Provided by:
The Home Depot
(480) 497-1466
745 S Val Vista Dr
Gilbert, AZ
 
Woodcraft - Chandler/Phoenix, AZ
(888) 549-9663
3002 N. Arizona Ave.
Chandler, AZ

Data Provided by:
The Home Depot
(480)644-9111
1740 S Country Club Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)753-3320
650 N 54th St, Suite A
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)802-7117
4141 S Arizona Ave
Chandler, AZ
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Tablesaw Template Trick

Tablesaw Template Trick

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge. I use double-face tape to attach a template to a slightly oversize workpiece, then push the template along the ledge. The result is a perfectly clean cut-with no router bit tear-out-that precisely follows any template. It's perfectly safe on sides down to 4 in. long.

I used 3/4-in. solid wood to build the fence, but plywood would do as well. The ledge is screwed and glued to the horizontal piece, 1 in. above its base. This gives enough clearance for the blade to be set higher than the 3/4-in.-thick workpiece. On the bandsaw, I rough-cut each workpiece 1/8 in. larger than the template on all sides. Presawing eliminates large offcuts, so there's no chance of kickback. All I get are sawdust and perfect copies of my pattern.


Click here to read the rest of the article from American Woodworker