American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Tablesaw Template Trick Mcalester OK

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge.

Mcalester True Value Hardware
(918) 429-1040
2119 N Main St
Mcalester, OK
 
Adam True Value Hdwe & Ag Sply
(918) 423-4381
1112 S George Nigh Expy
Mcalester, OK
 
Mc Alester - Auth Hometown
(918) 423-1300
500 Village Blvd
Mcalester, OK
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-19
Sun:13-18
Store Features
Mon:9-19
Tue:9-19
Wed:9-19
Thu:9-19
Fri:9-19
Sat:9-19
Sun:13-18

Quinton True Value Hrdw
(918) 469-2970
1020 Main
Quinton, OK
 
Hartshorne True Value
(800) 642-7392
105 Maple Ave
Hartshorne, OK

Data Provided by:
Fastenal- Mcalester
918-423-9444
700 E. Wyandotte Mcalester, OK, 74501
Mcalester, OK
 
Lowe's
(918) 715-2000
530 South George Nigh Expressway
Mcalester, OK
Hours
M-SA 7 am - 9 pm
SU 9 am - 8 pm

Hartshorne True Value
(918) 297-3636
1108 Pennsylvania Ave
Hartshorne, OK
 
Adam True Value Hardware & Ag Sply
(800) 642-7392
1112 S George Nigh Expy
Mcalester, OK

Data Provided by:
The Home Depot
(918)376-9975
9450 N 129th East Ave
Owasso, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Tablesaw Template Trick

Tablesaw Template Trick

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge. I use double-face tape to attach a template to a slightly oversize workpiece, then push the template along the ledge. The result is a perfectly clean cut-with no router bit tear-out-that precisely follows any template. It's perfectly safe on sides down to 4 in. long.

I used 3/4-in. solid wood to build the fence, but plywood would do as well. The ledge is screwed and glued to the horizontal piece, 1 in. above its base. This gives enough clearance for the blade to be set higher than the 3/4-in.-thick workpiece. On the bandsaw, I rough-cut each workpiece 1/8 in. larger than the template on all sides. Presawing eliminates large offcuts, so there's no chance of kickback. All I get are sawdust and perfect copies of my pattern.


Click here to read the rest of the article from American Woodworker