American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Tablesaw Template Trick Westerly RI

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge.

The Home Depot
(401)596-4440
120 Franklin St
Westerly, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)848-9217
1932 Norwich-New London
Uncasville, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(860)376-2047
142 River Road
Lisbon, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Mcquade's Ace Hardware
(401) 596-0302
105 Franklin St
Westerly, RI
 
Cash True Value Home Center
(860) 536-9601
9 Hendel Dr
Mystic, CT
 
Liberty Cedar, Inc.
(401) 789-6626
325 Liberty Lane
West Kingston, RI

Data Provided by:
The Home Depot
(860)437-1900
816 Hartford Turnpike
Waterford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

GK Woodworking LLC (Monthly Specials - see below)
(860) 608-7514
56 Browning Rd
Griswold, CT

Data Provided by:
Hanley & Williams Lumber Co.
(401) 596-2806
124 Oak Street
Westerly, RI
 
Holdridge True Value Hardware & H&gs
(860) 464-8400
749 Route 117
Ledyard, CT
 
Data Provided by:

Tablesaw Template Trick

Tablesaw Template Trick

A simple addition to my tablesaw fence allows me to cut dozens of identical odd-angled shapes in a hurry. It works just like a flush-cutting router bit. The auxiliary fence's ledge is exactly lined up with the blade's outer edge. I use double-face tape to attach a template to a slightly oversize workpiece, then push the template along the ledge. The result is a perfectly clean cut-with no router bit tear-out-that precisely follows any template. It's perfectly safe on sides down to 4 in. long.

I used 3/4-in. solid wood to build the fence, but plywood would do as well. The ledge is screwed and glued to the horizontal piece, 1 in. above its base. This gives enough clearance for the blade to be set higher than the 3/4-in.-thick workpiece. On the bandsaw, I rough-cut each workpiece 1/8 in. larger than the template on all sides. Presawing eliminates large offcuts, so there's no chance of kickback. All I get are sawdust and perfect copies of my pattern.


Click here to read the rest of the article from American Woodworker