American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Template Routing Tips Alexander City AL

Template routing has two big benefits. The first is repeatability.With template routing you can make one or 100 parts that are exactly alike. Second, template routing simplifies the job of making curved or complex shapes.

The Home Depot
(256)234-6399
1460 Hwy 280
Alexander City, AL
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

Russell Do it center
(256) 234-2567
1750 Hwy 22 W
Alexander City, AL
 
Russell Do it center
(334) 541-2132
1969 Kowaliga Road
Eclectic, AL
 
The Home Depot
(205)988-8141
3670 Galleria Circle
Birmingham, AL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(205)995-9357
4995 Hwy 280
Birmingham, AL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Alexander City-Auth Hometwn
(256) 329-2909
3862 Hwy 280
Alexander Cty, AL
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Russell Building Supply
(256) 825-4256
350 Fulton Street
Dadeville, AL
 
The Home Depot
(256)764-5037
351 Seville Street
Florence, AL
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

The Home Depot
(205)595-7780
7001 Crestwood Blvd
Birmingham, AL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(334)677-2790
3489 Ross Clark Circle
Dothan, AL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Template Routing Tips

Template Routing Tips

by Randy Johnson

If you want to get the most from your router, you need to master template routing. Once you learn the basics you can spend a lifetime exploring its many possibilities. You’ll be able to build more kinds of projects, more accurately and more easily. 

Template routing has two big benefits. The first is repeatability.With template routing you can make one or 100 parts that are exactly alike. Second, template routing simplifies the job of making curved or complex shapes. 

A midsize fixed- or plunge-base router is fine for most template routing. We prefer router bits with a 1/2-in. shank for their strength but many 1/4-in. shank bits will do a good job as well.

Bandsaw Guide for Rough Cutting

A template-following guide on a bandsaw makes it easy to rough cut workpieces prior to routing. The bandsaw blade sits in a notch about 1/8-in. back from the round end of the guide. The guide follows the edge of the template while the workpiece is cut oversize by 1/8 in., which is just right for most 

projects. Rough cutting your workpiece removes excess material so your router doesn’t have to work as hard. You will also get less chipping and burning. 


Use the Right Bit

There are three basic template router bits: a pattern bit with a top bearing, a flush-trim bit with a bottom bearing and a straight bit combined with a guide bushing which fits in a router’s baseplate. When possible, use the largest diameter bit that your router, template or wallet can handle, because large diameter bits are less likely to burn, chip or chatter. 

The diameter of the bearing on the pattern bit and flush-trim bit equal the cutting diameter of the bit. This simplifies template design because the template is made the same size as the finished workpiece. 

Using a guide bushing for template routing requires the template to be bigger or smaller than the final shape of the workpiece, depending on whether you rout on the inside or the outside of the template. 

Sizing the template can be a pain, but a guide bushing allows you to use any shape bit that will fit through the hole.


Span the Area

A wide auxiliary baseplate is the best way to span open template spaces. It can be made of plastic or wood and should be long enough to prevent the router from falling into the template opening. Double-faced carpet tape works well for attaching the auxiliary baseplate to the router’s main baseplate. 


Tools for Template Shaping

The two most useful tools for shaping and smoothing router templates are a disc sander for outside curves and an oscillating spindle  sander for inside curves. A drum sander on a drill press and a belt sander also work well.


Peel-and-Stick Template

Carpet tape is a quick way to attach a template when you are only making one or two parts. Make sure...

Click here to read the rest of the article from American Woodworker