American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Three Projects for Gardeners La Grande OR

Before you set aside your push sticks and dust mask for the season, make something to enjoy all summer. Each one of these projects takes only about a day to build, once you've got all the materials. They're designed for outdoor use—made from rot-resistant woods and assembled with weatherproof glue and rust-resistant fasteners.

Millers Dib Home Ctr & Lumber
(541) 963-3113
307 Greenwood Street
La Grande, OR
 
D & B Supply
(541) 963-8466
10101 E 1st Street
La Grande, OR
 
Bare's Hometown Hardware
(541) 562-5472
206 S Main St
Union, OR

Data Provided by:
Northwest Bamboo
(503) 695-3283
538 SE Northway Rd
Corbett, OR

Data Provided by:
The Home Depot
(541)344-1312
1045 Green Acres Rd
Eugene, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

La Grande - Auth Hometown
(541) 963-8451
1700 Portland Ave
La Grande, OR
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:11-16
Store Features
Mon:9.5-18.5
Tue:9.5-18.5
Wed:9.5-18.5
Thu:9.5-18.5
Fri:9.5-18.5
Sat:9-18
Sun:11-16

Hometown Hardware
(541) 562-5472
206 S Main
Union, OR
 
The Home Depot
(503)252-0188
11633 NE Glen Widing Dr
Portland, OR
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Goby Walnut Products
(503) 477-6744
5315 NW St. Helens Rd.
Portland, OR

Data Provided by:
The Home Depot
(541)567-9890
300 W Harper Road
Hermiston, OR
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-7:00pm

Data Provided by:

Three Projects for Gardeners

Three Projects for Gardeners

Thrill the garden lovers in your family with one (or more!) of these easy-to-make projects. 

Before you set aside your push sticks and dust mask for the season, make something to enjoy all summer. Each one of these projects takes only about a day to build, once you've got all the materials. They're designed for outdoor use—made from rot-resistant woods and assembled with weatherproof glue and rust-resistant fasteners. Protected with a finish or not, they'll enhance your garden or deck for years to come.

This sturdy little stand is perfect for your deck or patio. It's got room for your favorite plants and it doesn't take up a lot of space. When the weather gets cold, you can easily bring it, and a bit of summertime, indoors. There's no complicated joinery, just glue and screws. The legs simply chase each other around the base, like a pinwheel. The arms follow suit, but they're offset, so your plants have plenty of room to grow.

Once you make templates for the legs and arms and the jig for routing the discs, you'll have the stand together in no time. For tools, you'll need a tablesaw, jigsaw, router and a drill, plus clamps and a file or rasp. If you use construction-grade lumber, you won't need a planer or jointer. Rip the 1-1/2-in.-square column from a straight, clear 2x4 and use 1x stock for everything else. We went whole-hog, making ours out of mahogany. We spent about $100 for rough stock and milled it ourselves.

Exploded View
The legs and arms are offset to stagger the pots and maximize growing room for your plants.  

 

Detail 1: Optional Pot Spike


1-Mill all the parts to thickness. Cut the column (A), legs (B) and arms (E) to their finished dimensions.

2-Make templates for the leg and arm profiles ( Fig. C ).

3-Rough out the legs and arms with a jigsaw or bandsaw, about 1/8-in. oversize. Smooth the profiles with a rasp and sandpaper, a sanding drum mounted in your drill press, or an oscillating spindle sander.

4-Position each leg on the column and drill pilot holes for the screws (Photo 1). Be sure to mark the legs so they'll go back on the same column face during final assembly.

5-Round over the edges of the legs, except for portions that support the discs or go against the column (Fig. A). On the column, stop the round-overs 1-in. away from the joints.

6-Fasten the legs to the column with weatherproof glue and stainless steel screws.

7-Attach the column support block (C).

8-Glue the triangular-shaped arm blocks (D), cut from your leftover column stock, to the column (Photo 2). If a stuck-on block keeps sliding down the column, pull it off, remove the excess glue and stick it back on. Before gluing on the second pair, plane the first pair flush.

9-Attach the arms, following the same procedure you used for fastening the legs (Steps 4 through 6). Make s...

Click here to read the rest of the article from American Woodworker