American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Tombstone Doors Essex Junction VT

Fortunately,you don’t have to be a period furniture maker to incorporate tombstone doors into your work. The design looks right at home with modernfurniture, or it can work with paneling or kitchen cabinets. In fact,you can use tombstone doors wherever you want to dress up an otherwiseplain cabinet.

The Home Depot
(802)872-0039
759 Harvest Lane
Williston, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Lowe's of Essex
802-662-9131
10 Sussie Wilson Rd Essex Junction, VT, 05452
Essex Junction, VT
 
Bibens Ace-Essex
(802) 879-0249
15 Essex Way, Essex Shoppes & Cinema
Essex Junction, VT
 
Harvey Industries/White River Jct
(802) 295-3700
1354 North Heartland Rd White River Jct, VT, 05495
White River Jct, VT
 
Jerihill Home Center
(802) 899-1277
249 Vt Route 15
Jericho, VT
 
Essex Equipment
(802) 879-0767
26 Kellogg Road
Essex Junction, VT
 
Lowe's
(802) 662-9131
10 Susie Wilson Road
Essex Junction, VT
Hours
M-SA 6 am - 10 pm
SU 8 am - 7 pm

Harvey Industries/Williston
(802) 660-8111
71 Leroy Road Williston, VT, 05495
Williston, VT
 
Russell Supply
(802) 863-1177
9 Gregory Drive South Burlington, VT, 05407
South Burlington, VT
 
Lowe's of South Burlington, VT
802-318-9052
189 Hannaford Drive South Burlington, VT, 05403
South Burlington, VT
 

Tombstone Doors

Tombstone Doors

Tombstone Doors


by Lonnie Bird

Through many years studying and building 18th-century furniture,I’ve learned that this era produced countless fine examples of gooddesign. One example is the arched-top door. Often called a tombstonedoor because its shape resembles a grave marker, the panel on this typeof door is curved at the top and is capped by a matching curved rail.The overall effect is quite elegant, as shown at left.
Fortunately,you don’t have to be a period furniture maker to incorporate tombstonedoors into your work. The design looks right at home with modernfurniture, or it can work with paneling or kitchen cabinets. In fact,you can use tombstone doors wherever you want to dress up an otherwiseplain cabinet. Eighteenth-century cabinetmakers used a variety oftombstone designs in their work. Fig. C shows four basic doors,illustrating simple to elaborate designs. I’ll show you how I make astandard arched-top door as shown in Figs. A and B.

Lay Out the Top Rail

Figure C shows four traditional types of doors, with different archconfigurations. I’ll be making the most common type, the standard,where the centerline of the arch is aligned with the shoulders of thefield. The other types of doors are made like the standard door, butwith differing layouts.
Planning an arched-top door begins with thetop rail. The panel is then made to fit. Make a full-size drawing ofthe top rail for each different width of door. Follow the steps in Fig.D. When you know the dimensions of the top rail, you can make theremainder of your cutting list.

Prepare Your Stock

As with any door, it’s very important that the stock be well-driedand stable. I store it in the shop for a couple of weeks to let itsettle before working with it.
I mill the frame parts to 7/8 in.thickness for a stout, traditional-looking door. Cut the stiles 2 in.extra-long for ease in gluing up the door. This results in “horns” thatwill be trimmed off later (Fig. A).
Cut the mortise andtenon joints for the frame. I chop the mortises in the stiles using ahollow-chisel mortiser, and saw the tenons on my tablesaw. When cuttingthe tenons on the top and bottom rails, cut only the face-sideshoulders (see Photo 1).

Shape the Frame

Draw the curve on the top rail, saw to shape (Photo 1) and sand the shape smooth (Photo 2).On traditional frame-and-panel doors like these, I prefer a moldedinside edge on the frame, called “sticking.” Rout the molded edge onyour top rail, bottom rail and stiles, using a 3/32-in. roundover bitin your router table (Photo 3). Use a starter pin in your routertable for the curved top rail, and a straight fence for the otherparts. Then groove the frame members to receive the panel (Photo 4), using a piloted slot cutter. Miter the molded edge on both rails and stiles (Photo 5),and cut the back-side shoulders on the tenons. Use a tablesaw to cutthe unwanted molded edge ...

Click here to read the rest of the article from American Woodworker