American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Tool-Controlled Dust Collection Rutland VT

Do you use your dust collector every time you should? Probably not. With this new system, you will—without any extra effort. System 1 from Creative Dust Control is fully automatic. The system consists of a motorized blast gate, a tool module and a vacuum module. It's available for both 110- and 220-volt machines.

The Home Depot
(802)786-6900
299 US Rt 4 East
Rutland, VT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Goodro True Value Of Killington
(802) 422-3469
Rt 4
Killington, VT
 
Gilmore Home Center
(802) 468-5676
Route 4 A
Bomoseen, VT
 
E.c.crosby&sons A True Value Store
(802) 293-5111
49 Mill Rd
Danby, VT
 
NeighborWorks of Western Vermont
(802) 438-2303
110 Marble Street
West Rutland, VT
 
Noble Ace
(802) 773-2758
261 N Main St
Rutland, VT
 
Nail It Down Hardware
(802) 446-2133
34 Maple Street
Wallingford, VT
 
Brandon Lumber & Millwork
(802) 247-6000
11 Grove St
Brandon, VT
 
The Hardware At Rochester
(802) 767-4200
Rt 100 Main Street
Rochester, VT
 
Sheds and Barns Built On Site
(802) 349-0684
2039 route 144
benson, VT
Services Offered
Custom built sheds constructed on your property

Tool-Controlled Dust Collection

Tool-Controlled Dust Collection

Tool-Controlled Dust Collection
Do you use your dust collector every time you should? Probably not. With this new system, you will—without any extra effort. System 1 from Creative Dust Control is fully automatic. The system consists of a motorized blast gate, a tool module and a vacuum module. It's available for both 110- and 220-volt machines. When a tool is turned on, the System 1 automatically opens the blast gate and turns on your dust collector. When you turn off the tool, your dust collector will also shut off and the blast gate motors will shut. Each tool plugs into the tool module, which connects to the motorized blast gate by telephone cord. Yes, telephone cord! A second telephone cord connects the tool module to the vacuum module. The vacuum module controls the dust collector. Like the tool module, the vacuum module, which the system requires to work, is a plug-and-play system. You'll need one tool module (which includes a 4-in. motorized blast gate) for each tool you want on the system. Multiple tool modules can be daisy-chained, and you can mix and match tool voltages. Each module has a manual override, so you can open the gate and run the collector without the tool running. Connecting three tools to this system costs $275 but means never doing more than turning on a connected tool to make sure your dust collector is running. Hookup is easy. Late in 2004, Creative Dust Control also introduced a nonmotorized blast gate, $10, that can be used independently or with the rest of the system. The gate can be wired directly to the vacuum module so opening and closing the gate turns the vacuum on and off.

Source:
Creative Dust Control, (314) 434-1655, www.creativedustcontrol.com, System 1: Vacuum module, V-1, 110-volt, $50; V-2, 220-volt, $50, Tool module with motorized blast gate, TG-1, 110-volt, $75; TG-2, 220-volt, $75.

See the image

Blast-Gate-Controlled Dust Collection
JDS and Penn State Industries offer systems that provide less automated, but less expensive, solutions. With either system, when you open a blast gate, the dust collector automatically comes on. Close the gate and the collector shuts off. The systems are nearly identical. Each includes a control box that the dust collector plugs into. The control box is wired to special 4-in. blast gates throughout the shop. Each blast gate contains a low-voltage micro switch that opens and closes along with the gate. You can wire as many blast gates as you need into one control box. As long as one gate is open, the collector will run. The wiring is simple and the instructions are easy to follow. Different control boxes are required for 110-volt and 220-volt dust collectors. Connecting three tools to one of these systems costs $100. You'll need to reach for and open the blast gate each time you run the tool to make sure the collector is on. The JDS Dust Gate start-up kit, $60, includes one dust gate, one 110-volt central c...

Click here to read the rest of the article from American Woodworker