American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Trophy Coffee Table Fernandina Beach FL

Big planks of wood with natural bark edges make my heart race. Most woodworkers share a desire to build something from a single, thick plank of wood. After 20 years of building custom cabinets and furniture, I finally got my chance.

Hanna's Woodworks
(912) 576-1243
PO Box 6442
St. Marys, GA

Data Provided by:
The Home Depot
(904)766-2818
12111 Lem Turner Rd
Jacksonville, FL
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Kmart 7613 / Cross Merch
(904) 261-2004
1525 Sadler Rd
Fernandina Be, FL
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Fernandina Bch-Auth Hometwn
(904) 261-5511
1118A South 14Th Street
Fernandina, FL
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:11-16
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:11-16

Fernandina Lumber & Supply Co.
(904) 261-3641
117 South 3rd Street
Fernandina Beach, FL
 
The Home Depot
(904)225-2940
463785 State Road 200
Yulee, FL
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Turner Ace Hdw Fernandina
(904) 261-5270
2990 S 8th St
Fernandina Bch, FL
 
LOWE'S OF FERNANDINA BEACH, FL
904 277-5000
3965 EAST S.R. 200 FERNANDINA BEACH, FL, 32034
Fernandina Beach, FL
 
Lowe's
(904) 277-5000
474283 East Sr 200
Fernandina Beach, FL
Hours
M-SA 6 am - 9 pm
SU 8 am - 8 pm

Kmart 3991 / Cross Merch
(912) 729-6116
1601 State Hwy 40 E
Kingsland, GA
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Data Provided by:

Trophy Coffee Table

Trophy Coffee Table

Stunning Beauty Right from the Tree

by Dave Munkittrick

Big planks of wood with natural bark edges make my heart race. Most woodworkers share a desire to build something from a single, thick plank of wood. After 20 years of building custom cabinets and furniture, I finally got my chance.

The first step was finding that perfect slab of wood—not an easy task. Slicing a tree into planks, bark edge and all, is not a common sawmill practice. I started my hunt in the Yellow Pages under “Sawmills.” I found a number of people with portable mills, but without a log for them to saw, I was out of luck. I tried a few tree-trimming companies to see whether they had a tree trunk or two they needed to dispose of. Two strikes.

Finally, I turned to the Internet (Photo 1). I found the slab of my dreams: a huge (14- to 36-in.-wide x 12-ft.-long) slice of English Burly Wych Elm (pronounced “witch elm”) (see “Sources,” page 64). I knew immediately that this was the one. When the wood arrived at my door (Photo 2), I quickly realized that building with a single rough slab requires a completely different approach than working with individual boards.

Photo 1: I found the perfect plank for my coffee table on the Internet. It was a 12-ft.-long slab of Burly English Wych Elm. It was like no other piece of wood I’d ever seen. I couldn’t wait.

Photo 2: The day the wood arrived, I had to call on a couple of neighbor friends just to get the crate in the shop! 

On one hand, no decisions would be needed about grain pattern or color that individual boards require. With a single slab of wood, your only task is to present the natural beauty of the wood in the best way possible, despite all its inherent defects, such as loose bark pockets, rough edges, dirt, checks and cracks. On the other hand, just handling such an enormous yet delicate piece of wood presents some unique challenges. 

I had a lot of fun building this table and you will, too, if you decide to build one like it. Because every natural-edged board is unique, it’s difficult to give an exact formula on how to design or build a natural-edge table. Even if they come from the same tree, no two boards are alike. What follows is my experience as I built this table in front of the camera.

Arrival Day

After the wood was ordered, I couldn’t wait for it to arrive. With all my thoughts on possessing that piece of wood, I neglected to plan ahead and be ready for its arrival. I discovered the hard way that you can’t handle a large plank the way you can individual boards (Photo 2, above). 

When we got the wood in the shop, I didn’t let practical considerations slow me down. Totally intoxicated by what was inside the crate, I felt a burning desire to see the wood, now! We popped the bands and lifted off the protective cover. My heart sank at what I saw: an enormous slice of tree t...

Click here to read the rest of the article from American Woodworker