American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Trophy Coffee Table Sevierville TN

Big planks of wood with natural bark edges make my heart race. Most woodworkers share a desire to build something from a single, thick plank of wood. After 20 years of building custom cabinets and furniture, I finally got my chance.

The Home Depot
(865)428-0116
128 Allensville Road
Sevierville, TN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(865)573-1457
140 Green Road
Knoxville, TN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Blalock Hardware Co Inc
(423) 453-3601
703 E Gate Road
Sevierville, TN
 
Lowe's
(865) 453-3115
610 Winfield Dunn Parkway
Sevierville, TN
Hours
M-SA 6 am - 10 pm
SU 8 am - 8 pm

Trentham's Ace Hardware
(865) 436-5173
1025 E Parkway
Gatlinburg, TN
 
Jeffries Fine Lumber
(865) 573-5876
8807 Valgro Road
Knoxville, TN

Data Provided by:
Fastenal- Sevierville
865-908-7554
1012 Old Knoxville Hwy Ste 1 Sevierville, TN, 37862
Sevierville, TN
 
Kmart 9735 / Cross Merch
(865) 428-0014
217 Forks Of River Pkwy
Sevierville, TN
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

LOWE'S OF SEVIERVILLE, TENN.
865 453-3115
610 WINFIELD DUNN PKWY SEVIERVILLE, TN, 37876
Sevierville, TN
 
Lowe's
(865) 475-1361
638 E. Broadway Boulevard
Jefferson City, TN
Hours
M-SA 7 am - 9 pm
SU 9 am - 7 pm

Data Provided by:

Trophy Coffee Table

Trophy Coffee Table

Stunning Beauty Right from the Tree

by Dave Munkittrick

Big planks of wood with natural bark edges make my heart race. Most woodworkers share a desire to build something from a single, thick plank of wood. After 20 years of building custom cabinets and furniture, I finally got my chance.

The first step was finding that perfect slab of wood—not an easy task. Slicing a tree into planks, bark edge and all, is not a common sawmill practice. I started my hunt in the Yellow Pages under “Sawmills.” I found a number of people with portable mills, but without a log for them to saw, I was out of luck. I tried a few tree-trimming companies to see whether they had a tree trunk or two they needed to dispose of. Two strikes.

Finally, I turned to the Internet (Photo 1). I found the slab of my dreams: a huge (14- to 36-in.-wide x 12-ft.-long) slice of English Burly Wych Elm (pronounced “witch elm”) (see “Sources,” page 64). I knew immediately that this was the one. When the wood arrived at my door (Photo 2), I quickly realized that building with a single rough slab requires a completely different approach than working with individual boards.

Photo 1: I found the perfect plank for my coffee table on the Internet. It was a 12-ft.-long slab of Burly English Wych Elm. It was like no other piece of wood I’d ever seen. I couldn’t wait.

Photo 2: The day the wood arrived, I had to call on a couple of neighbor friends just to get the crate in the shop! 

On one hand, no decisions would be needed about grain pattern or color that individual boards require. With a single slab of wood, your only task is to present the natural beauty of the wood in the best way possible, despite all its inherent defects, such as loose bark pockets, rough edges, dirt, checks and cracks. On the other hand, just handling such an enormous yet delicate piece of wood presents some unique challenges. 

I had a lot of fun building this table and you will, too, if you decide to build one like it. Because every natural-edged board is unique, it’s difficult to give an exact formula on how to design or build a natural-edge table. Even if they come from the same tree, no two boards are alike. What follows is my experience as I built this table in front of the camera.

Arrival Day

After the wood was ordered, I couldn’t wait for it to arrive. With all my thoughts on possessing that piece of wood, I neglected to plan ahead and be ready for its arrival. I discovered the hard way that you can’t handle a large plank the way you can individual boards (Photo 2, above). 

When we got the wood in the shop, I didn’t let practical considerations slow me down. Totally intoxicated by what was inside the crate, I felt a burning desire to see the wood, now! We popped the bands and lifted off the protective cover. My heart sank at what I saw: an enormous slice of tree t...

Click here to read the rest of the article from American Woodworker