American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Variable-Speed Mini Lathe Circle Pines MN

A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

The Home Depot
(763)717-0316
4550 Pheasant Ridge Dr
Blaine, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)571-9600
5650 Main St, NE
Fridley, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(651)464-5277
1943 W Broadway Avenue
Forest Lake, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(651)770-9600
2360 White Bear Ave No
Maplewood, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)533-1200
6701 Boone Ave North
Brooklyn Park, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)795-2060
99 Northtown Drive
Blaine, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)422-1200
3550 124th Ave NW
Coon Rapids, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Rockler Woodworking and Hardware #13
(651) 773-5285
1935 Beam Avenue
Maplewood, MN

Data Provided by:
The Home Depot
(612)782-9594
1520 New Brighton Blvd
Minneapolis, MN
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(763)494-0117
15800 Grove Circle North
Maple Grove, MN
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Variable-Speed Mini Lathe

Variable-Speed Mini Lathe

    

Although the market is loaded with mini lathes, few of them offer the convenience of variable speed. Enter Steel City Tool Works' variable-speed mini lathe ($379). Once you start controlling this lathe's speed with its dial, you'll never want to go back. A step pulley is used to set speed ranges, high and low, and the speed dial takes over from there. The low range goes from 500 to 1,350 rpm, and the high range from 1,400 to 3,800 rpm. A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

Source
Steel City Tool Works, (877) 724-8665,
www.steelcitytoolworks.com  Variable-speed mini lathe, #60100, $379. Bed extension, #60727, $69.

Click here to read the rest of the article from American Woodworker