American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Variable-Speed Mini Lathe Dodge City KS

A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

Dodge City - Auth Hometown
(620) 227-2141
2601 Central Ave
Dodge City, KS
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:12-18
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:10-21
Sun:12-18

Mead Lumber
(620) 227-2108
1400 Frontview
Dodge City, KS
 
The Home Depot
(316)773-1988
8444 W McCormick Ave
Wichita, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(785)272-5949
5900 SW Huntoon
Topeka, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(620)728-0460
1907 E 17th Avenue
Hutchinson, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Farm & Home Center
(620) 225-0067
401 W Trail St
Dodge City, KS
 
Waters True Value Hardware
(620) 227-2900
310 West Frontview Rd
Dodge City, KS
 
The Home Depot
(913)789-8899
5700 Antioch
Merriam, KS
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(620)275-5943
3110 E Kansas Ave
Garden City, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(785)625-0044
1310 E 41st Street
Hays, KS
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Variable-Speed Mini Lathe

Variable-Speed Mini Lathe

    

Although the market is loaded with mini lathes, few of them offer the convenience of variable speed. Enter Steel City Tool Works' variable-speed mini lathe ($379). Once you start controlling this lathe's speed with its dial, you'll never want to go back. A step pulley is used to set speed ranges, high and low, and the speed dial takes over from there. The low range goes from 500 to 1,350 rpm, and the high range from 1,400 to 3,800 rpm. A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

Source
Steel City Tool Works, (877) 724-8665,
www.steelcitytoolworks.com  Variable-speed mini lathe, #60100, $379. Bed extension, #60727, $69.

Click here to read the rest of the article from American Woodworker