American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Variable-Speed Mini Lathe Elkhorn WI

A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

The Home Depot
(262)248-6297
550 N Edwards Blvd
Lake Geneva, WI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(262)363-7141
232 E Wolf Run
Mukwonago, WI
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-8:00pm

Jackson's Do it Best Hardware
(262) 723-3338
635 N Wisconsin Street
Elkhorn, WI
 
Lowe's
(262) 740-2728
2015 East Geneva Street
Delavan, WI
Hours
M-SA 6:30 am - 9 pm
SU 8 am - 7 pm

Lake Geneva - Auth Hometown
(262) 248-8571
200 Edwards Blvd Ste C
Lake Geneva, WI
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-21
Tue:9-21
Wed:9-21
Thu:9-21
Fri:9-21
Sat:9-18
Sun:10-16
Store Features
Mon:9-21
Tue:9-21
Wed:9-21
Thu:9-21
Fri:9-21
Sat:9-18
Sun:10-16

BADGER HARDWOODS OF WISCONSIN, LTD.
(262) 275-1162
N1517 US Highway 14
Walworth, WI

Data Provided by:
Woller True Value
(262) 723-2286
455 E Geneva St
Elkhorn, WI
 
Delavan - Auth Hometown
(262) 740-9135
307 S Wright St
Delavan, WI
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16
Store Features
Mon:9.5-19
Tue:9.5-19
Wed:9.5-19
Thu:9.5-19
Fri:9.5-19
Sat:9-18
Sun:11-16

Ace Hardware
(262) 728-8228
840 E Geneva St
Delavan, WI
 
Dunn Lumber&true Value Hdw.
(262) 248-4459
826 North St
Lake Geneva, WI
 
Data Provided by:

Variable-Speed Mini Lathe

Variable-Speed Mini Lathe

    

Although the market is loaded with mini lathes, few of them offer the convenience of variable speed. Enter Steel City Tool Works' variable-speed mini lathe ($379). Once you start controlling this lathe's speed with its dial, you'll never want to go back. A step pulley is used to set speed ranges, high and low, and the speed dial takes over from there. The low range goes from 500 to 1,350 rpm, and the high range from 1,400 to 3,800 rpm. A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

Source
Steel City Tool Works, (877) 724-8665,
www.steelcitytoolworks.com  Variable-speed mini lathe, #60100, $379. Bed extension, #60727, $69.

Click here to read the rest of the article from American Woodworker