American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Variable-Speed Mini Lathe Gilbert AZ

A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

The Home Depot
(480)497-1466
745 S Val Vista Dr
Gilbert, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodcraft - Chandler/Phoenix, AZ
(888) 549-9663
3002 N. Arizona Ave.
Chandler, AZ

Data Provided by:
The Home Depot
(480)899-5013
1155 W Chandler Blvd
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)461-0251
853 N Dobson Road
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)830-2463
6708 E McKellips Rd
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480) 497-1466
745 S Val Vista Dr
Gilbert, AZ
 
The Home Depot
(480)396-0227
425 S Val Vista Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)644-9111
1740 S Country Club Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)753-3320
650 N 54th St, Suite A
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)496-9700
725 W Warner Rd
Tempe, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Variable-Speed Mini Lathe

Variable-Speed Mini Lathe

    

Although the market is loaded with mini lathes, few of them offer the convenience of variable speed. Enter Steel City Tool Works' variable-speed mini lathe ($379). Once you start controlling this lathe's speed with its dial, you'll never want to go back. A step pulley is used to set speed ranges, high and low, and the speed dial takes over from there. The low range goes from 500 to 1,350 rpm, and the high range from 1,400 to 3,800 rpm. A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

Source
Steel City Tool Works, (877) 724-8665,
www.steelcitytoolworks.com  Variable-speed mini lathe, #60100, $379. Bed extension, #60727, $69.

Click here to read the rest of the article from American Woodworker