American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Variable-Speed Mini Lathe Winsted CT

A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

The Home Depot
(860)496-8620
1580 Litchfield Tpke
New Hartford, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(860)286-0300
55 Granby Street
Bloomfield, CT
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Berkshire Products, Inc.
(413) 229-7919
884 Ashley Falls Rd PO Box 591
Sheffield, MA

Data Provided by:
Lowe's
(860) 618-4273
420 Winsted Road
Torrington, CT
Hours
M-SA 6 am - 10 pm
SU 7 am - 8 pm

True Value Home Hdw.&gnd.center
(860) 651-5646
16 Railroad St
Simsbury, CT
 
The Home Depot
(860)582-5329
1149 Farmington Ave
Bristol, CT
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Moore's Sawmill
(860) 242-3003
171 Mountain Ave
Bloomfield, CT

Data Provided by:
Park Place Hardware
(860) 379-4274
11 Park Pl
Winsted, CT
 
Goshen Hardware Inc
(860) 491-3087
59 Torrington Rd
Goshen, CT
 
Montana's Hardware Inc
(860) 658-1085
1414 Hopmeadow St
Simsbury, CT
 
Data Provided by:

Variable-Speed Mini Lathe

Variable-Speed Mini Lathe

    

Although the market is loaded with mini lathes, few of them offer the convenience of variable speed. Enter Steel City Tool Works' variable-speed mini lathe ($379). Once you start controlling this lathe's speed with its dial, you'll never want to go back. A step pulley is used to set speed ranges, high and low, and the speed dial takes over from there. The low range goes from 500 to 1,350 rpm, and the high range from 1,400 to 3,800 rpm. A 1/2-hp motor supplies the power. The Steel City machine has a 10-in. swing over the bed and 15-in. capacity between centers. Adding a bed extension increases the capacity to 37-3/4 in. The drive spindle is 1-in. diameter with 8 threads per inch (tpi). Both the head and tail stock take a No. 2 Morse taper.

Source
Steel City Tool Works, (877) 724-8665,
www.steelcitytoolworks.com  Variable-speed mini lathe, #60100, $379. Bed extension, #60727, $69.

Click here to read the rest of the article from American Woodworker