American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » »

Veritas Planes Keene NH

Veritas planes have a generous amount of room in front of the rear handle. This is particularly welcome on smooth planes, where space is often cramped. The handle is supported on top to prevent it from breaking, a common problem with old Stanley planes.

Keene - B
(603) 338-5000
480 West St
Keene, NH
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-19
Store Features
Mon:9.5-21
Tue:9.5-21
Wed:9.5-21
Thu:9.5-21
Fri:9.5-21
Sat:9-21
Sun:10-19

W W Building Supply
(802) 365-4333
7 Loop Rd
Newfane, VT
 
Woodcraft - Portsmouth, NH
(603) 433-6116
25 Fox Run Road
Newington, NH

Data Provided by:
The Home Depot
(603)542-4471
425 Washington St
Claremont, NH
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 8:00am-7:00pm

Goosebay Sawmill & Lumber
(603) 798-5135
83 Dover Road Route 4
Chichester, NH

Data Provided by:
Jacks True Value Hardware
(603) 352-1517
37 Park Ave.
Keene, NH
 
Best Septic
(802) 463-9444
153 Birchview Ext
Westminster, VT
Services Offered
Waste services, porta potty, jetting, portable toilet rentals, septic solutions, locating septic tanks, septic tank repair, septic tank cleaning, septic tank filters, septic tank services, snaking, camera service, septic trouble shooting, hand wash station rentals, septic design, septic installation, septic maintenance
Hours
24/7 Emergency Service

Northland Forest Products, Inc.
(603) 642-3665
16 Church StreetPO Box 369
Kingston, NH

Data Provided by:
Rockler Woodworking and Hardware #34
(603) 898-5941
373 S. Broadway
Salem, NH

Data Provided by:
East Coast Lbr & Bldg Sply Co
(603) 329-5322
4 Colonial Drive
East Hampstead, NH
 
Data Provided by:

Veritas Planes

Veritas Planes

A great value in premium hand tools

by Tom Caspar

“I’m really getting the itch to use good hand tools, so what kind of plane should I buy?” I’ve answered that question for years by urging students in my Unplugged Woodshop class to find a vintage Stanley, tune it up and buy a new high-quality blade. Now I’ve got a better answer: simply pick up the phone or go online and order a new Veritas hand plane from Lee Valley Tools (see Sources, below). 

Feature for feature, Veritas planes are the equal of other premium planes, but they’re significantly less expensive. Considering what you get, and the hours of tune-up labor you’ll save, they’re very reasonably priced.

The latest entry in the Veritas series is a #6 fore plane ($220) for jointing edges and flattening large surfaces. Veritas also makes #4 ($175) and #4-1/2 ($180) smooth planes, and a #5-1/4 jack plane, ($190). All of these planes share the same innovative features, unique to Veritas. A low-angle smooth plane ($160) and a low-angle block plane ($100) are also available.

Features

- Premium Blade 

A great blade can make all the difference in the world, and Veritas blades are among the best. Standard plane blades generally perform well only when freshly sharpened. Premium blades hold a keen edge far longer.

Premium blades are stiffer than standard blades. Veritas blades are made from 1/8-in.-thick A2 steel, a very durable alloy new to plane making. These blades are about 50-percent thicker than standard blades, and that makes them less prone to skip and jump, or “chatter.”

Veritas planes use a screw rather than the standard cam lever to lock down the blade. A screw is a little less convenient than a lever, but it’s not a big deal.

- Rock-Solid Frog

Take a Veritas plane apart and it’s full of surprises. The frog (the part that supports the blade) has extra-large machined surfaces. It actually extends through the sole of the plane in order to support the blade as close to the cutting edge as possible. The frog’s large face and solid bedding further reduce blade chatter.

The blade adjustment mechanism is quite unusual. You swing a knob side to side to level the blade, and turn the same knob to adjust the blade’s depth of cut. One quarter turn of the knob moves the blade up or down by 0.003 in. (the thickness of a piece of paper), about the same as other planes. It’s too bad that the knob is so small in diameter, though. Larger knobs are easier to fine-tune.

Veritas planes have a generous amount of room in front of the rear handle. This is particularly welcome on smooth planes, where space is often cramped. The handle is supported on top to prevent it from breaking, a common problem with old Stanley planes.

- Stable and Tough Body

Flattening the bottom of a plane is hard work. It’s a thankless task that’s got to be done for a plane t...

Click here to read the rest of the article from American Woodworker