American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Versatile Throat Plate Fort Morgan CO

Zero-clearance throat plates are one of the best accessories you can put on your tablesaw. With a slot that tightly fits the blade, you get less tear-out and no trapped offcuts, with both standard blades and dado sets. Buying a whole stack of throat plates for every width of dado cut can really add up, though.

Mr. D'S Ace Home Center
(970) 867-3303
1000 East Platte Avenue
Fort Morgan, CO
 
Ft Morgan - Auth Hometown
(970) 867-5200
1997 E Piatte Ave
Fort Morgan, CO
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:9-18
Sun:12.5-17.5

Fastenal- Ft. Morgan
970-867-4475
19873 US Highway 34 Ft. Morgan, CO, 80701
Ft. Morgan, CO
 
Country Do it Best Hardware
(970) 483-7312
218 Main St.
Wiggins, CO
 
The Home Depot
(719)573-7000
102 N Academy Rd
Colorado Springs, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Murdoch's Ranch & Home Supply
(970) 542-1515
1207 W. Platte Avenue
Fort Morgan, CO
 
Bloedorn Lumber Building Mtrls
(970) 867-5646
130 State Street
Fort Morgan, CO
 
Farm & Home Hardware
(970) 842-2879
122 Custer St
Brush, CO
 
The Home Depot
(970)748-9483
0295 Yoder Avenue
Avon, CO
Hours
Mon-Sat: 7:00am-9:00pm
Sun: 8:00am-8:00pm

The Home Depot
(970)522-1599
1614 W Main Street
Sterling, CO
Hours
Mon-Sat: 7:00am-8:00pm
Sun: 8:00am-8:00pm

Versatile Throat Plate

Versatile Throat Plate


Zero-clearance throat plates are one of the best accessories you can put on your tablesaw. With a slot that tightly fits the blade, you get less tear-out and no trapped offcuts, with both standard blades and dado sets. Buying a whole stack of throat plates for every width of dado cut can really add up, though. Sure, you can make your own, but that takes precious shop time. With the Tru-Cut Insert System ($80) you'll never have to make or buy another zero-clearance throat plate again. It's got replaceable inserts; when you switch blades, you leave the throat plate in the saw and simply swap one insert for another. The throat plate is aluminum and the inserts are phenolic plastic. There are screws for leveling both the throat plate and the insert. Spring-loaded plungers keep the throat plate from wiggling around in the opening. There's a notch in the rear of this throat plate for your saw's splitter. Most commercial zero-clearance throat plates don't have this notch, which is a real shortcoming. Splitters really do prevent accidents and should always be used when practical. The Tru-Cut throat plate comes in different sizes, and is currently made to fit some Delta, Jet, Powermatic and DeWalt saws.

Source
Art Betterley Enterprises, (800) 871-7516, Tru-Cut Blade Insert System, $80, Replacement inserts, $18 for 2, $30 for 4.


Click here to read the rest of the article from American Woodworker