American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 
» » ยป

Versatile Throat Plate Gilbert AZ

Zero-clearance throat plates are one of the best accessories you can put on your tablesaw. With a slot that tightly fits the blade, you get less tear-out and no trapped offcuts, with both standard blades and dado sets. Buying a whole stack of throat plates for every width of dado cut can really add up, though.

The Home Depot
(480)497-1466
745 S Val Vista Dr
Gilbert, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)396-0227
425 S Val Vista Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)899-5013
1155 W Chandler Blvd
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)461-0251
853 N Dobson Road
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)830-2463
6708 E McKellips Rd
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480) 497-1466
745 S Val Vista Dr
Gilbert, AZ
 
Woodcraft - Chandler/Phoenix, AZ
(888) 549-9663
3002 N. Arizona Ave.
Chandler, AZ

Data Provided by:
The Home Depot
(480)644-9111
1740 S Country Club Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)802-7117
4141 S Arizona Ave
Chandler, AZ
Hours
Mon-Sat: 6:00am-9:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)753-3320
650 N 54th St, Suite A
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Versatile Throat Plate

Versatile Throat Plate


Zero-clearance throat plates are one of the best accessories you can put on your tablesaw. With a slot that tightly fits the blade, you get less tear-out and no trapped offcuts, with both standard blades and dado sets. Buying a whole stack of throat plates for every width of dado cut can really add up, though. Sure, you can make your own, but that takes precious shop time. With the Tru-Cut Insert System ($80) you'll never have to make or buy another zero-clearance throat plate again. It's got replaceable inserts; when you switch blades, you leave the throat plate in the saw and simply swap one insert for another. The throat plate is aluminum and the inserts are phenolic plastic. There are screws for leveling both the throat plate and the insert. Spring-loaded plungers keep the throat plate from wiggling around in the opening. There's a notch in the rear of this throat plate for your saw's splitter. Most commercial zero-clearance throat plates don't have this notch, which is a real shortcoming. Splitters really do prevent accidents and should always be used when practical. The Tru-Cut throat plate comes in different sizes, and is currently made to fit some Delta, Jet, Powermatic and DeWalt saws.

Source
Art Betterley Enterprises, (800) 871-7516, Tru-Cut Blade Insert System, $80, Replacement inserts, $18 for 2, $30 for 4.


Click here to read the rest of the article from American Woodworker