American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Wheelbarrow Planer Stand Baton Rouge LA

A mobile planer stand isn't new, but you can make some modifications to make a special one. The following article has more detailed information to help you make your own one.

The Home Depot
(225)201-1778
8181 Airline Highway
Baton Rouge, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225)293-9629
10300 Coursey Blvd
Baton Rouge, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225)664-3656
2255 Home Depot Dr
Denham Springs, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225)644-5670
2740 South Cajun Ave
Gonzales, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Holmes Do it Best Bldg Mtrl
(225) 926-2031
6190 Greenwell Springs Rd
Baton Rouge, LA
 
The Home Depot
(225) 201-1778
8181 Airline Hwy
Baton Rouge, LA
 
The Home Depot
(225)755-1729
18139 Highland Rd
Baton Rouge, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(225)658-2592
6600 Main Street
Zachary, LA
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Government Street True Value Hdwe
(225) 343-8705
2882 Government St
Baton Rouge, LA
 
Baton Rouge Rentals
225-924-2959
5101 Government Street Baton Rouge, LA, 70806
Baton Rouge, LA
 

Wheelbarrow Planer Stand

Wheelbarrow Planer Stand


 



A mobile planer stand isn't new, but the modifications I added to mine just might be. When I lift the handles, the legs lift off the floor for easy moving, just like a wheelbarrow. When I set it down, all the feet sit firmly on the ground and the handles fold down and out of the way. The whole stand with hardware cost me about $35. The nonswiveling 3-in. wheels are attached to support boards that extend 6 in. beyond the front legs. I installed the supports so the wheels are about 1/8 in. off the floor when the stand is resting on all four legs. The handles, which taper to 1-1/2 in. at the grip end, are joined to each other with a stretcher and attached to the rear apron with 3-in. T hinges. I attached the strap leaf to the underside of the handle first and attached the other leaf to the rear apron. I installed the hinges this way because the screws hold better in the handles' face grain than in their end grain. The 20-in. x 20-in. top is 2x4s glued together. The rest of the stand is simply glued and screwed together. To prevent the planer from sliding, I bolted it to the stand.

Click here to read the rest of the article from American Woodworker