American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Wheelbarrow Planer Stand Fall River MA

A mobile planer stand isn't new, but you can make some modifications to make a special one. The following article has more detailed information to help you make your own one.

St. Angelo Hardwoods, Inc. - Genuine Asian Teak Specialist
(401) 624-3900
490 Eagleville Road
Tiverton, RI

Data Provided by:
The Home Depot
(401)845-5092
878 W Main Road
Middletown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Providence, RI
(401) 886-1175
1000 Division Street
East Greenwich, RI

Data Provided by:
Lowe's
(508) 441-5284
55 Faunce Corner Road
N. Dartmouth, MA
Hours
M-SA 6 am - 10 pm
SU 7 am - 7 pm

Bourassas True Value Hdw.
(508) 995-6366
1837 Acushnet Ave
New Bedford, MA
 
Good Wood
(508) 344-7888
1025 Drift Rd
Westport, MA

Data Provided by:
The Home Depot
(401)295-1184
1255 Ten Rod Road
North Kingstown, RI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

North Dartmouth Plz
(508) 979-7200
100 N Dartmouth Mall
N Dartmouth, MA
Store Hours
Sears Stores
Store Type
Sears Stores
Hours
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:10.5-18.5
Store Features
Mon:10-21
Tue:10-21
Wed:10-21
Thu:10-21
Fri:10-21
Sat:9-21
Sun:10.5-18.5

Handren's Paint & Hardware
(401) 293-5290
3001 East Main Road
Portsmouth, RI
 
Fairhaven True Value Hdw.
(508) 997-3307
23 Popes Island
New Bedford, MA
 
Data Provided by:

Wheelbarrow Planer Stand

Wheelbarrow Planer Stand


 



A mobile planer stand isn't new, but the modifications I added to mine just might be. When I lift the handles, the legs lift off the floor for easy moving, just like a wheelbarrow. When I set it down, all the feet sit firmly on the ground and the handles fold down and out of the way. The whole stand with hardware cost me about $35. The nonswiveling 3-in. wheels are attached to support boards that extend 6 in. beyond the front legs. I installed the supports so the wheels are about 1/8 in. off the floor when the stand is resting on all four legs. The handles, which taper to 1-1/2 in. at the grip end, are joined to each other with a stretcher and attached to the rear apron with 3-in. T hinges. I attached the strap leaf to the underside of the handle first and attached the other leaf to the rear apron. I installed the hinges this way because the screws hold better in the handles' face grain than in their end grain. The 20-in. x 20-in. top is 2x4s glued together. The rest of the stand is simply glued and screwed together. To prevent the planer from sliding, I bolted it to the stand.

Click here to read the rest of the article from American Woodworker