American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Wheelbarrow Planer Stand Flat Rock MI

A mobile planer stand isn't new, but you can make some modifications to make a special one. The following article has more detailed information to help you make your own one.

The Home Depot
(734)671-4400
23300 W Allen
Woodhaven, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(313)271-8842
3163 Fairlane Drive
Allen Park, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)495-9414
45900 Michigan Ave
Canton, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)458-4956
13500 Middlebelt
Livonia, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)844-7300
39825 Ford Road
Canton, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(734)287-7400
11100 Telegraph Road
Taylor, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(313)359-9600
25451 Michigan Avenue
Dearborn Heights, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(313)593-4644
5951 Mercury Drive
Dearborn, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Woodcraft - Canton, MI
(734) 981-6808
42102 Ford Road
Canton, MI

Data Provided by:
The Home Depot
(734)975-1029
3300 Carpenter Rd
Ypsilanti, MI
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Data Provided by:

Wheelbarrow Planer Stand

Wheelbarrow Planer Stand


 



A mobile planer stand isn't new, but the modifications I added to mine just might be. When I lift the handles, the legs lift off the floor for easy moving, just like a wheelbarrow. When I set it down, all the feet sit firmly on the ground and the handles fold down and out of the way. The whole stand with hardware cost me about $35. The nonswiveling 3-in. wheels are attached to support boards that extend 6 in. beyond the front legs. I installed the supports so the wheels are about 1/8 in. off the floor when the stand is resting on all four legs. The handles, which taper to 1-1/2 in. at the grip end, are joined to each other with a stretcher and attached to the rear apron with 3-in. T hinges. I attached the strap leaf to the underside of the handle first and attached the other leaf to the rear apron. I installed the hinges this way because the screws hold better in the handles' face grain than in their end grain. The 20-in. x 20-in. top is 2x4s glued together. The rest of the stand is simply glued and screwed together. To prevent the planer from sliding, I bolted it to the stand.

Click here to read the rest of the article from American Woodworker