American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Wheelbarrow Planer Stand Tempe AZ

A mobile planer stand isn't new, but you can make some modifications to make a special one. The following article has more detailed information to help you make your own one.

The Home Depot
(480)775-6404
1330 W Baseline Road
Tempe, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)496-9700
725 W Warner Rd
Tempe, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)899-5013
1155 W Chandler Blvd
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)461-0251
853 N Dobson Road
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)396-0227
425 S Val Vista Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodworkers Source - Store #1
(480) 355-5090
645 W. Elliot Rd
Tempe, AZ

Data Provided by:
The Home Depot
(480)644-9111
1740 S Country Club Dr
Mesa, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(480)753-3320
650 N 54th St, Suite A
Chandler, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Woodcraft - Chandler/Phoenix, AZ
(888) 549-9663
3002 N. Arizona Ave.
Chandler, AZ

Data Provided by:
The Home Depot
(480)951-8211
9170 E Indian Bend Rd
Scottsdale, AZ
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Data Provided by:

Wheelbarrow Planer Stand

Wheelbarrow Planer Stand


 



A mobile planer stand isn't new, but the modifications I added to mine just might be. When I lift the handles, the legs lift off the floor for easy moving, just like a wheelbarrow. When I set it down, all the feet sit firmly on the ground and the handles fold down and out of the way. The whole stand with hardware cost me about $35. The nonswiveling 3-in. wheels are attached to support boards that extend 6 in. beyond the front legs. I installed the supports so the wheels are about 1/8 in. off the floor when the stand is resting on all four legs. The handles, which taper to 1-1/2 in. at the grip end, are joined to each other with a stretcher and attached to the rear apron with 3-in. T hinges. I attached the strap leaf to the underside of the handle first and attached the other leaf to the rear apron. I installed the hinges this way because the screws hold better in the handles' face grain than in their end grain. The 20-in. x 20-in. top is 2x4s glued together. The rest of the stand is simply glued and screwed together. To prevent the planer from sliding, I bolted it to the stand.

Click here to read the rest of the article from American Woodworker