American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

Wheelbarrow Planer Stand Tulsa OK

A mobile planer stand isn't new, but you can make some modifications to make a special one. The following article has more detailed information to help you make your own one.

Woodcraft - Tulsa
(918) 384-0100
5511 E. 41st Street
Tulsa, OK

Data Provided by:
The Home Depot
(918)632-0069
4041 S Sheridan
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)299-3028
8880 S Delaware Avenue
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

Kmart 3238 / Cross Merch
(918) 749-5056
3132 E 51St St
Tulsa, OK
Store Hours
Miscellaneous
Store Type
Miscellaneous
Hours
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21
Store Features
Monday To Friday Working Hours is :8-22 and for Sat:8-22
Sun:8-21

Westlake Ace Hardware
(918) 712-7376
3948 S Peoria Ave
Tulsa, OK
 
The Home Depot
(918)583-3400
901 S Elgin Avenue
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)459-3700
9808 East 71st
Tulsa, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

The Home Depot
(918)376-9975
9450 N 129th East Ave
Owasso, OK
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 8:00am-8:00pm

LOWE'S OF TULSA-MIDTOWN, OK
918 712-8199
1525 SOUTH YALE AVENUE TULSA, OK, 74112
Tulsa, OK
 
SPEC Building Materials
918-832-1566
6205 E 15th Street Tulsa, OK, 74112
Tulsa, OK
 
Data Provided by:

Wheelbarrow Planer Stand

Wheelbarrow Planer Stand


 



A mobile planer stand isn't new, but the modifications I added to mine just might be. When I lift the handles, the legs lift off the floor for easy moving, just like a wheelbarrow. When I set it down, all the feet sit firmly on the ground and the handles fold down and out of the way. The whole stand with hardware cost me about $35. The nonswiveling 3-in. wheels are attached to support boards that extend 6 in. beyond the front legs. I installed the supports so the wheels are about 1/8 in. off the floor when the stand is resting on all four legs. The handles, which taper to 1-1/2 in. at the grip end, are joined to each other with a stretcher and attached to the rear apron with 3-in. T hinges. I attached the strap leaf to the underside of the handle first and attached the other leaf to the rear apron. I installed the hinges this way because the screws hold better in the handles' face grain than in their end grain. The 20-in. x 20-in. top is 2x4s glued together. The rest of the stand is simply glued and screwed together. To prevent the planer from sliding, I bolted it to the stand.

Click here to read the rest of the article from American Woodworker