American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

World's Best Routing Guide Barre VT

The base protrudes by the radius of the router's base. The fence must have a straight edge---;I used the factory edge of my MDF. Routing the base with a straight bit completes the guide.

Barre - Auth Hometown
(802) 479-2541
1598 Us Route 302 Berlin
Barre, VT
Store Hours
Hometown Dealers
Store Type
Hometown Dealers
Hours
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:8-17
Sun:10-15
Store Features
Mon:9-18
Tue:9-18
Wed:9-18
Thu:9-18
Fri:9-18
Sat:8-17
Sun:10-15

Harrys Hardware
(802) 563-2291
3087 Main St
Cabot, VT
 
Waitsfield True Value
(802) 496-2496
Village Square Shopping Center
Waitsfield, VT
 
Farm N Country Hardware
(802) 433-1158
2383 Vermont Rte 14
Williamstown, VT

Data Provided by:
Kenyons True Value
(800) 642-7392
93 N Main Street
Northfield, VT

Data Provided by:
Kenyons True Value
(802) 485-9676
93 N Main St
Northfield, VT
 
Kenyons Variety
(802) 496-3922
3337 Main St
Waitsfield, VT
 
Waterbury True Value
(802) 244-8905
838 Waterbury Stowe Rd
Waterbury, VT
 
Builder Specialties
(802) 223-5583
92 River St.
Montpelier, VT
 
Harry's Hardware
(800) 642-7392
3087 Main Street
Cabot, VT

Data Provided by:
Data Provided by:

World's Best Routing Guide

World’s Best Routing Guide



This simple guide guarantees success whenever you need to make a straight routing pass. It's perfect for jointing a long edge or routing dadoes and grooves. You'll get smooth, chatter-free results, thanks to the guide's firm support fence. Positioning the guide is foolproof, because it's dedicated to the bit you plan to use. The guide is nothing more than a 1/2-in.-thick fence glued to a 1/4-in.-thick base. The base protrudes by the radius of the router's base. The fence must have a straight edge—I used the factory edge of my MDF. Routing the base with a straight bit completes the guide. To use, simply align the guide's base with your cutline on the workpiece. Clamp the guide in position and rout, using the same straight bit that you used to complete the guide. For best results, don't try to remove more than 1/16 in. from the edge or to rout a dado deeper than 1/4 in. at a time.

The guide works perfectly with your router, because you use your router to make it. Make the base extra wide; then trim it with your router. Now when you use the guide, the routed base indicates the edge of the cut, as long as you rout with the same bit or another bit with the same diameter.

A short guide is perfect for routing dadoes and rabbets. Make sure the guide extends beyond the workpiece on both ends.

 

Difficult operations, such as squaring the ends of a large tabletop, are a breeze. When you rout end grain, clamp a block against the back edge, so you don't blow it out.

Click here to read the rest of the article from American Woodworker