American Woodworker
Contact Us | Help | Report a Bug
Sign in | Join
 

World's Best Routing Guide Colorado Springs CO

The guide works perfectly with your router, because you use your router to make it. Make the base extra wide; then trim it with your router. Now when you use the guide, the routed base indicates the edge of the cut, as long as you rout with the same bit or another bit with the same diameter.

The Home Depot
(719)573-7000
102 N Academy Rd
Colorado Springs, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(719)471-0054
2250 Southgate Rd
Colorado Springs, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

The Home Depot
(719)266-5165
5660 E Woodmen Road
Colorado Springs, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

Circle Ace Hardware
(719) 550-3702
1225 N Circle Dr
Colorado Springs, CO
 
Fastenal- Colorado Springs
719-390-8515
910 S. Nevada Colorado Springs, CO, 80903
Colorado Springs, CO
 
Woodcraft - Colorado Springs, CO
(719) 266-9889
750 W. Garden of the Gods Rd.
Colorado Springs, CO

Data Provided by:
Crafted Wood
(719) 633-3664
2720 Robinson Street
Colorado Springs, CO

Data Provided by:
The Home Depot
(719)484-0900
15888 Jackson Creek Pkwy
Monument, CO
Hours
Mon-Sat: 6:00am-10:00pm
Sun: 7:00am-8:00pm

ABC Supply Co.,Inc/Colorado Springs
719-635-5500
706 S Sierra Madre Colorado Springs, CO, 80903
Colorado Springs, CO
 
Fastenal- Colorado Springs
719-638-1588
296 South Academy Blvd Suite L Colorado Springs, CO, 80910
Colorado Springs, CO
 
Data Provided by:

World's Best Routing Guide

World's Best Routing Guide

This simple guide guarantees success whenever you need to make a straight routing pass. It’s perfect for jointing a long edge or routing dadoes and grooves. You’ll get smooth, chatter-free results, thanks to the guide’s firm support fence. Positioning the guide is foolproof, because it’s dedicated to the bit you plan to use.  

The guide is nothing more than a 1/2-in.-thick fence glued to a 1/4-in.-thick base. The base protrudes by the radius of the router’s base. The fence must have a straight edge—I used the factory edge of my MDF. Routing the base with a straight bit completes the guide (see photos, below). 

To use, simply align the guide’s base with your cutline on the workpiece. Clamp the guide in position and rout, using the same straight bit that you used to complete the guide. For best results, don’t try to remove more than 1/16 in. from the edge or to rout a dado deeper than 1/4 in. at a time.

The guide works perfectly with your router, because you use your router to make it. Make the base extra wide; then trim it with your router. Now when you use the guide, the routed base indicates the edge of the cut, as long as you rout with the same bit or another bit with the same diameter.

A short guide is perfect for routing dadoes and rabbets. Make sure the guide extends beyond the workpiece on both ends.

Difficult operations, such as squaring the ends of a large tabletop, are a breeze. When you rout end grain, clamp a block against the back edge, so you don’t blow it out.

Click here to read the rest of the article from American Woodworker